Container type standard curing room

Container type standard curing roomSuitable for cement plants, cement product factories, and construction units of building highways, quality inspection units for temperature and humidity control in standard maintenance rooms. It is easy and fast to use, with electronic digital temperature control and precise temperature and humidity control. The temperature and humidity can be controlled at 20 ℃± 1 and above 90%.

Easy to use, automatic temperature and humidity control, adjustable, and good insulation. *Can meet the needs of standardized maintenance work on construction sites and provide repeated maintenance services for construction sites

Container type standard curing roomMain technical parameters

Temperature control accuracy: 20 ± 1 ° C

Temperature control range ≥ 90% (relative humidity)

Heating power: 3KW

Cooling power: ＜ 2KW（

Humidification power: 60W

Power supply stabilization: 220V ± 10% V

Power frequency: 50Hz

Container size: 6×2.4×2.55 meters

Supporting equipment:

small

1 maintenance room control device (wall mounted)

1 stainless steel heating water tank

One negative ion humidifier

One 1.5P cold and warm on/off air conditioner

medium-sized

One fully automatic control device for the maintenance room (cabinet type)

1 stainless steel heating water tank

One negative ion humidifier

One single cooling window unit air conditioner

medium-sized

One fully automatic control device for the maintenance room (cabinet type)

1 stainless steel heating water tank

1 ultrasonic humidifier

One 1.5P cold and warm on/off air conditioner

large-scale

1 set of fully automatic controller

1 set of indoor cooling and heating hanging machine

1 set of 1.5P outdoor refrigeration unit

1 ultrasonic humidifier

4 sets of test block racks that can be placed in the maintenance room [optional]

BYS-IIIType maintenance room fully automatic control deviceSuitable for cement plants, cement product factories, and construction units of highways, scientific research and quality inspection units to regulate and control the temperature and humidity of standard maintenance rooms. It has the advantages of simple installation, easy operation, no need for training, and accurate control.

10Main technical parameters within square meters:

1Power supply voltage: 220V/50Hz

2Temperature control accuracy: 20 ± 1 ℃

3Temperature control range: 4-99 ℃

4Humidity control accuracy: ≥ 95% RH (adjustable)

5Humidification power: 4KW

6Heating power: 4KW

7Cooling power: 4KW

20Main technical parameters within square meters:

1Power supply voltage: 220V/50Hz

2Temperature control accuracy: 20 ± 1 ℃

3Temperature control range: 4-99 ℃

4Humidity control accuracy: ≥ 95% RH (adjustable)

5Humidification power: 8KW

6Heating power: 8KW

7Cooling power: 8KW

FHBS-60 standard curing room fully automatic temperature and humidity control equipment

Main technical parameters

1. Power supply voltage AC: 380V, three-phase four wire

2. Heating output power 7.5KW, output voltage 380V

3. Refrigeration output power 2.3KW, output voltage 380V

4. Humidification output voltage 220V

5. Temperature control 20 ℃± 1.5 accuracy ± 0.1

6. Humidity control 95% RH ± 2 accuracy 10-99.8% RH

The control instrument has a timed humidification function, which automatically humidifies for 10 minutes and stops for 40 minutes.

The working voltage range of the instrument is 85V-265V.

Structure and Working Principle

1. It consists of four parts: control system, humidification system, heating system, and refrigeration system. The temperature and humidity control are automatically exchanged by digital display instruments, without the need for manual control.

2. Working principle:

(1) Temperature control: When the temperature inside the maintenance room is higher than the upper limit set value of the temperature controller, the control system outputs a cooling signal to control the air conditioner. Conversely, when the temperature is lower than the lower limit set value of the temperature controller, the main unit heats up. When the control requirements are met, it automatically returns to a constant temperature state, and this process is repeated to achieve the control goal.

(2) Humidity control: When the humidity in the maintenance room is lower than the set value, the control system outputs a humidification signal, and the main humidifier starts working, causing the indoor humidity to reach 95% or above, and then automatically stops working.

SBY-30BType cement specimen constant temperature water curing boxaccording to the standardGB-17671-1999Method for testing the strength of cement mortarISOThe curing requirements for cement mortar specimens in the law require the design and production of inner tanks and sinks made of stainless steel plates.

Suitable for cement plants, construction units, highway and bridge engineering units, and relevant scientific research and quality inspection departments to perform standard maintenance on the strength and setting time of cement, concrete, and cement product samples.

Technical parameters:

Temperature control accuracy:±0.1℃

Temperature difference inside the box:≤20±1℃

Cooling power:220V～180W

Heating power:1000W

Studio size:180×320×75㎜

Overall dimensions800×850×1600㎜

Test piece can be placed30group Number of drawers:30only

SBY-60BType cement specimen constant temperature water curing boxaccording to the standardGB-17671-1999Method for testing the strength of cement mortarISOThe curing requirements for cement mortar specimens in the law require the design and production of inner tanks and sinks made of stainless steel plates.

Suitable for cement plants, construction units, highway and bridge engineering units, and relevant scientific research and quality inspection departments to perform standard maintenance on the strength and setting time of cement, concrete, and cement product samples.

Technical parameters:

Temperature control accuracy:±0.1℃

Temperature difference inside the box:≤20±1℃

Cooling power:220V～240W

Heating power:1000W

Studio size:180×320×75㎜

Overall dimensions1100×850×1820㎜

Test piece can be placed60group Number of drawers:60only

40×40×160mmCement sand test mold
It's standard“Method for testing the strength of cement mortar(ISOlaw) GB/T17671-1999”The equipment specified in the regulations.

Technical specifications:

Cast iron trial mold;

Mold cavity size(long×wide×deep)：140×40×160 mm；

Base appearance*Large size:245×165×60 mm；

net Heavy:≈6.5k

SHBY-40AType mortar standard curing boxSuitable for the maintenance of standard test blocks in various dry powder mortar factories of scientific research quality inspection departments and construction units. Adopting an intelligent temperature and humidity control system, it can correctly command functions such as heating, cooling, and humidification, perform fully automatic switching work, achieve dynamic balance of temperature and humidity inside the box, and realize the state adjustment of specimens and the standard environment for testing.

Technical parameters:

Temperature control accuracy:±1℃

Temperature difference inside the box:≤± 2℃

Humidity control accuracy:±3％RH

Moisture control range:RH45-90%Above(Adjustable)

Power supply voltage:220V±10％

Humidification power:55W

Humidification capacity:400milliliter/hour

Heating power:400W

Cooling power:150W

Dehumidification power:150W

wind Machine:220V 30W

SBY-5Type wet heat curing box

according toGB1345-77TheGB/T17671-1999Designed and manufactured using the "Method for Testing the Strength of Cement Mortar" and technical data provided by the Building Materials Research Institute and relevant departments.

Easy to operate, equipped with electric heating and cooling devices, can be controlled under any temperature and water conditions20±1The use of ℃ for specimen curing provides one of the best equipment for standard curing specimens in large, medium, and small cement plants as well as scientific research departments in construction.

Main technical parameters:

1. Temperature control range:20℃

2. Temperature control accuracy: ±1℃

3. Moisture control range: ≥95％

4. electricity Source:220V 50HZ

5. electricity hot Tool:500W

6. Refrigerant Freon:F12

7. Compressor power:>145W

8. Humidification power:50W

9. heavy Quantity: Approximately175kg

Cement shrinkage test mold 25 * 25 * 280mm

According to JC/T 603-2004 Cement Mortar Drying Shrinkage Test Method, it is used to make 25 × 25 × 280 cement mortar drying shrinkage performance test specimens and expansion cement expansion rate test specimens, with spherical copper nails at both ends. There is also a 25.4 × 25.4 × 285 alkali aggregate trial mold.

Technical parameters:

1. Size: Length 280mm, Height 25mm, Width 25mm

2. The length between the inner sides of the nail heads at both ends should be maintained at 250 ± 2.5mm

3. Net weight: ≈ 7kg

SHBY-40BType concrete standard curing boxaccording toGB1345-99The "Method for Testing the Stability of Cement Standard Consistency, Water Consumption, and Setting Time" is developed, designed, and manufactured based on technical data provided by the Building Materials Research Institute and relevant departments. It is suitable for large, medium, and small cement plants, as well as construction and engineering departments, for the setting and curing of concrete and cement specimens.

Main technical parameters:

1Control humidity temperature:RH95%Above

2Control temperature:20℃±1℃

3Power supply voltage:220V/50HZ

4Heating power:500W

5Cooling power:145W

6Humidification power:45W

7Increase wet Quantity:400milliliter/hour

8Humidifier volume:5.5L

9Box space:

40Btypesingle doorcan be placed150³Concrete test block15Group（45A)Heating tube power500W）

Exterior dimensions (length)×wide×High):1020×630×1460mm

Inner container size (length)×wide×High):600×500×1200mm

JKSType alkali aggregate test box

standardDLTThe "Test Code for Hydraulic Concrete Sand and Gravel Aggregates" requires design and manufacturing, and is suitable for temperature and humidity control during expansion testing of sand and gravel aggregates.

Technical parameters:

Temperature control range: room temperature100℃ (adjustable) water pump power40W

Temperature control accuracy: ±0.2℃

Voltage:380±10％

Moisture control range:1-9999hour

Frequency:50±1HZ

Heating power:6KW

Size:660×530×520(Net height)440mm）

SHBY-40BType concrete standard curing boxaccording toGB1345-99The "Method for Testing the Stability of Cement Standard Consistency, Water Consumption, and Setting Time" is developed, designed, and manufactured based on technical data provided by the Building Materials Research Institute and relevant departments. It is suitable for large, medium, and small cement plants, as well as construction and engineering departments, for the setting and curing of concrete and cement specimens.

Main technical parameters:

1Control humidity temperature:RH95%Above

2Control temperature:20℃±1℃

3Power supply voltage:220V/50HZ

4Heating power:800W

5Cooling power:145W

6Humidification power:45W

7Increase wet Quantity:400milliliter/hour

8Humidifier volume:5.5L

9Box space:

40Btypetop and bottom openingcan be placed150³Concrete test block20Group（60A)Heating tube power800W）

Exterior dimensions (length)×wide×High):1120×630×1550mm

Inner container size (length)×wide×High):700×520×1250mm

SHBY-60BType concrete standard curing boxaccording toGB1345-99The "Method for Testing the Stability of Cement Standard Consistency, Water Consumption, and Setting Time" is developed, designed, and manufactured based on technical data provided by the Building Materials Research Institute and relevant departments. It is suitable for large, medium, and small cement plants, as well as construction and engineering departments, for the setting and curing of concrete and cement specimens.

Main technical parameters:

1Control humidity temperature:RH95%Above

2Control temperature:20℃±1℃

3Power supply voltage:220V/50HZ

4Heating power:1000W

5Cooling power:145W

6Humidification power:45W

7Increase wet Quantity:400milliliter/hour

8Humidifier volume:5.5L

9Box space:

60BTwo doors opencan be placed150³Concrete test block40Group（120A)Heating tube power1000W）

Exterior dimensions (length)×wide×High):1640×620×1470mm

Inner container size (length)×wide×High):1200×500×1100mm

SHBY-90BType concrete standard curing box according toGB1345-99The "Method for Testing the Stability of Cement Standard Consistency, Water Consumption, and Setting Time" is developed, designed, and manufactured based on technical data provided by the Building Materials Research Institute and relevant departments. It is suitable for large, medium, and small cement plants, as well as construction and engineering departments, for the setting and curing of concrete and cement specimens.

Main technical parameters:

1Control humidity temperature:RH95%Above

2Control temperature:20℃±1℃

3Power supply voltage:220V/50HZ

4Heating power:2000W

5Cooling power:145W

6Humidification power:45W

7Increase wet Quantity:400milliliter/hour

8Humidifier volume:5.5L

9Box space:

90Bthree-doorcan be placed150³Concrete test block60Group（180A)Heating tube power2000W）

Exterior dimensions (length)×wide×High):1980×700×1460mm

Inner container size (length)×wide×High):1550×630×1200mm

Containerized curing room and mobile standard curing room are suitable for various cement plants, cement product factories, and construction and road construction units. Quality inspection units can control the temperature and humidity of standard curing rooms conveniently and quickly. Electronic digital display temperature control ensures precise temperature and humidity control, with a temperature of 20 ℃± 1 and a humidity of over 95%, which is controllable. The movable standard curing room is converted from a container and has the advantages of easy use, accurate and adjustable temperature and humidity control, good insulation, and reusability. It can meet the needs of standard curing work on construction sites and save costs for the repeated construction of maintenance rooms.

technical indicators
Temperature control accuracy: 20 ± 1 ° C (water type heating tube)
Temperature control range ≥ 90% (relative humidity) (usually for high-power negative ion humidifiers)
Heating power: 2KW
Cooling power:<2KW (standard room air conditioning)
Humidification power: 60W Power supply voltage regulation: 220V ± 10% V Power frequency: 50HZ
Applicable area: 6 * 2.4-meter standard container.
Equipment List: One temperature and humidity controller, one set of sensors, one heating water tank, and one set of negative ion humidifier.

Note: Customized maintenance room test block racks can be processed

NJ-160A cement slurry mixer Mix cement and water according to the standard specifications to form a uniform test slurry, which is used to determine the standard consistency and setting time of cement and to make qualitative test blocks Main technical parameters: Slow revolution speed of stirring blade: 62 ± 5r/min Rapid revolution of stirring blade: 125 ± 10r/min Slow rotation speed of stirring blade: 140 ± 5r/min Rapid rotation of stirring blades: 285 ± 10r/min Mixing blade width: 111mm Mixing pot size: (inner diameter x depth) Φ160mm×139mm	JJ-5 typeCement sand mixer Designed by the Cement Institute of the Academy of Building Materials Science, it is an equipment specified in the standard GB/T17671-1999 for testing the strength of cement mortar (ISO method). It is suitable for mixing during the preparation of cement mortar specimens and can be used for cement testing and mixing of cement paste and mortar according to standards. Main technical parameters: 1. Mixing blade width 135mm 2. Mixing pot capacity 5L 3. Mixing blade speed r/min (table omitted) 4. Net weight ≈ 70kg
ZT96 type adhesive sand specimen forming vibration compaction table This compaction table is an equipment used to determine the strength of cement mortar according to the ISO679:1989 cement strength test method, and its structure and performance meet the requirements of JC/T682-1997. Main technical parameters: Amplitude: 15mm ± 3mm Vibration frequency: 60 times/S ± 1S Total weight of the table (including arm): 13.7Kg ± 0.25Kg Volume: 104 × 300 × 460mm Power supply: 220V	DKZ-5000 electric flexural testing machine Determination of flexural strength of test blocks used for cement or other non-metallic brittle materials Main technical parameters: Test force: 1000N when using a horizontal bar When using parallel bars: 5000N Indication accuracy: ± 1% Horizontal bar output ratio: 10:1 Parallel bar output ratio: 50:1 Loading rate (dual lever): 50N/S
TS45 Cement Mortar Flow Tester Determine the water consumption for the standard consistency of cement mortar by measuring its flowability value.	FZ-31A type all stainless steel boiling box Two methods were used to determine the stability of cement: the Rayleigh method and the test cake method. The instrument can automatically control the temperature and insulation, and can also be manually controlled. Main technical parameters: 1. Effective volume: approximately 31 liters 2. Heating and boiling time: 3 hours 3. Heating power: 2 groups totaling 4KW 4. Net weight: ≈ 20kg
FYS-150B Negative Pressure Sieve Analyzer This instrument is tested according to the standard T0502-2005 (cement fineness test method 80um sieve analysis method) and is used in laboratories and cement research institutions. Main technical parameters: (1) Sieve analysis test fineness: 80um (2) Screen analysis self-control time: 2 minutes (adjustable) (3) Adjustable working negative pressure: 4000-6000Pa (4) Working voltage: 220V~750W	SBY-40A cement standard curing box This instrument is designed and manufactured according to the standard maintenance requirements of the cement institute and the Ministry of Communications for the new standard test block of cement. It is made of impermeable steel plate inside. The spray device uses ultrasonic humidification, refrigeration uses high-power compressor, temperature and humidity (digital display), and can be equipped with a micro printer (printing time can be set arbitrarily). Main technical parameters: Temperature controller accuracy: ± 1 ℃ Temperature difference inside the box: ≤ 1 ℃ Working voltage: 220V ± 10% Heating power: 600W Compressor power: 180W Internal dimensions: 530 × 550 × 1190mm
DKZ-5000/6000 electric flexural testing machine Used for predicting the flexural strength of cement and other non-metallic brittle material test blocks. The product complies with the requirements of GB/T17671, GB3350, BS4550, and ISO679 standards. Test force: 1000N when using a single lever When using parallel bars, 5000N/6000N Indication accuracy ± 1% Horizontal bar output ratio 10:1 Dual bar output ratio 50:1 Loading rate (dual lever) 50N/s Anti bending fixture The diameter of the loading roller and support roller is 10mm Support roller distance 100 ± 0.1mm Partition spacing 46mm Net weight ≈ 85kg	TYE-6 cement mortar flexural testing machine Used for the determination of flexural strength of cement or other non-metallic brittle material test blocks. The product complies with the requirements of GB/T17671, GB3350, BS4550, and ISO679 standards. Power supply AC220V/50Hz (± 10%) Test force 6000N Loading speed 50N/s ± 5N/s Indication accuracy ± 1% Printer size 57mm × 103mm Working environment temperature: 0-40 ℃ Relative humidity<80% Dimensions 500mm × 365mm × 690mm
LD-50 type Rayleigh clamp tester It is mainly used to test whether the quality of the clamp meets the requirements, and also to measure the increase in the distance between the two pointers of the clamp before and after boiling to determine the stability of the cement. The product meets the requirements of GB/T1346 and ISO9597 standards. Weight of weight 300g Value scale plate with a small engraving distance of 0.5mm Net weight ≈ 1.65kg	Standard viscosity and setting time tester for clean slurry Mainly used to determine the standard consistency, water consumption, and setting time of cement paste. The product meets the requirements of GB/T1346, ASTMC187, and ISO9597 standards. The total weight of the sliding part is 300g Sliding part travel 70mm