constant temperature and humidity chamber

1、 Product Introduction

Polymer cement waterproof coating constant temperature and humidity curing box is widely used for standard curing of building materials such as cement, mortar, concrete, putty, gypsum, etc. Accurate temperature control data and easy calibration. Can simultaneously meet the temperature and humidity curing requirements of different materials.

2、 Compliant with standards

GB/T234452025 Polymer Cement Waterproof Coating

3、 Technical parameters

1. Temperature range: 5 ℃~50 ℃

2. Temperature fluctuation: ≤± 0.5 ℃

3 Temperature accuracy: 0.01 ℃

4 Temperature uniformity: ≤ 2 ℃

5 humidity range: 20% RH to 98% RH

6 Humidity accuracy: 0.1% RH

Studio size: 620 × 550 × 1300mm (width, depth, height)

8 partitions, 5 layers

9. Dimensions: 1160 × 820 × 1500mm (width, depth, height)

10 Power supply voltage: 220V 50Hz

11 has circulating air

Net weight: 260KG

4、 Safety precautions

1. To ensure the safety of equipment testing, please install external protective grounding and supply power according to the equipment nameplate requirements.

2. The equipment is strictly prohibited from being used for experiments on flammable, explosive, toxic, and highly corrosive materials.

3. The equipment should be installed horizontally, and the new machine should be parked for 24 hours before starting up to prevent compressor oil leakage caused by transportation.

4. When the temperature inside the box is ≥ 50 ℃, do not set the low temperature to avoid opening the refrigeration compressor, in order to ensure the compressor operates for a long life.

5. When there is an alarm prompt, it must be eliminated and cannot be forcibly turned on.

6. Please read the equipment manual carefully before operating this device.