Cone shaped extraction tank

1、 Product Overview:

extraction tankIt is a multi-purpose equipment designed for the extraction process of traditional Chinese medicine factories, which can perform various process operations such as extraction, alcohol recovery, and volatile oil separation in this process. In addition to the main equipment of the extraction tank, this device is also equipped with a defoamer, condenser, cooler, dual filter, oil-water separator, liquid medicine pump, etc. These devices are all made of stainless steel. This device operates in a fully sealed and recyclable system during the extraction process,At the same time, organic solvents can be recovered from the waste residue.

1Like water extraction: Water and traditional Chinese medicine are loaded into the extraction tank, and the interlayer heat source is started. After the tank boils, the supply of heat source is reduced, and the boiling inside the tank is maintained. The maintenance time depends on the extraction pharmacological process. If closed extraction is required, cooling water is given to cool the steam vapor and return it to the extraction tank to maintain circulation and temperature.

2For example, alcohol extraction: First, add the medicine and alcohol into the tank, which must be sealed. Steam the interlayer heat source, turn on the cooling water to reach the required temperature in the tank, and reduce the supply of heat source. The rising vapor state alcohol can be refluxed after passing through the condenser into liquid alcohol. To improve efficiency, a pump can be used to force circulation, so that the medicine is sucked out from the lower part of the tank through the pump and then imported back into the tank from the upper part of the cylinder, relieving local channeling.

3Oil extraction: First, add the traditional Chinese medicine containing volatile oil and water into the extraction tank,Open the circulation valve of the oil separator,Adjust the bypass reflux valve,When the supply heat source valve reaches the volatilization temperature, open the cooling water for cooling,The cooled liquid medicine should be kept at a certain height in the separator to separate it,Rotate the use of another oil-water separator.

4Recycling oil essence: Add alcohol to the cylinder, open the cooling water for steam, and then open the recycling valve.

2、 Technical parameters: