Concentration gas analyzer

Concentration gas analyzerProduct Introduction

MIX series updatesConcentration gas analyzer, capable of diluting standard gases in a certain proportion to output a set concentration gas, can be connected

Accept four types of standard gases. Calibration instruments used for gas sensors, gas analyzers, and other products. This product is based on gas passing through MFC (Mass Flow Control)

The principle of manufacturing equipment is based on ISO 6145/7 and other standards. Equipped with a capacitive touch screen LCD interface, all functions are easy to manage

Use it. Each mass flow controller is calibrated by a traceable primary standard factory. Each mass flow controller is equipped with traceable standards

Factory calibration with NIST (National Institute of Standards and Technology) traceable calibration certificate.

Concentration gas analyzerProduct features

High precision quality flow controller, with an accuracy better than 1%

Efficient mixing device and excellent anti adsorption pipeline design, suitable for dilution and gas distribution of easily adsorbed and reactive compounds

Wide dynamic range (conventional dilution ratio 1:1~1:100000);

scalable

Fast gas flow control (stabilization time<100 ms)

Preheating time ≤ 5 minutes

Flexible configuration. Standard gas can switch up to 4 gases in a single channel

It has storage function and can store 30 calibration points. Having a sequence

Calibration function, capable of storing 30 calibration sequences

Equipped with timing function, the instrument automatically starts sequence calibration

Equipped with Ethernet, RS485, RS232 interfaces, capable of remote control of instrument operation

The instrument has an automatic cleaning function, which can automatically clean the pipeline

Concentration gas analyzerProduct Parameters

Flow accuracy: 0.8% set point (optional 0.6% set point)

Flow repeatability: 0.2% full scale

Dilution ratio: 1:1~1:1000 (customizable)

Response time:<=600ms

Preheating time:<=5 minutes

Dilution gas flow range: 0~10SLPM (other ranges can be selected)

Standard airflow range: 0~100SCCM (other ranges can be selected)

Pipeline material: 316L stainless steel/PFA/PTFE

Power supply: 200~240V, 50/60Hz

Power supply:<=50W

Communication interface: 1 * Ethernet; 1*RS485; 1*USB; 2*RS232

Communication protocol: MODBUS-RTU

Working temperature range: 0~50 ℃

Size: 560 * 482 * 133mm (length * width (height))

Weight: Approximately 15kg

Concentration gas analyzerScope of application

Testing and Calibration of Gas Analysis Instruments

Gas sensor testing and calibration

Sample gas debugging

Spectral and chromatographic analysis

Environmental Air Automatic Monitoring Station