Composite film 180&# 176; Peel strength testing machine

Introduction to the use of peel strength tester:

Dongguan Zhongyi Precision Instrument Co., Ltd. ZY-BL30Composite film 180 ° peel strength testing machineAn electronic peel testing machine suitable for performance testing of adhesives, adhesive tapes, stickers, protective films, release papers, composite films, synthetic leather, woven bags, films, paper and other related products, including peeling and tensile testing. This machine can be equipped with various fixtures and elongation testing devices, or assembled according to customer needs. The film tensile machine is suitable for testing the tensile strength, fracture elongation, and other items of wrapping film.

Technical parameters are for reference only. For specific details, please call for consultation:

Capacity selection: (6~300) N for tensile testing of paper and other materials, etc

Unit switching: gf, kgf, N, LBf, kN
Load decomposition degree: 1/800000
Load accuracy: within ± 0.5%

Power accuracy: ≤ 0.01N

Force resolution: 0.01N

Test range of experimental force: 0.4% -100% FS

Accuracy of indication: indication error ± 1%, indication variability ≤ 1%

Extension measurement range: (0-130) mm (at a standard test length of 180mm)
The most bigJourney: 400mm without fixtures

Gap spacing positioning error ± 0.5mm

Reset error of moving chuck ± 0.1mm

Sample width: ≤ 25mm
Test speed: (5-500) mm/min (computer input speed)

Return speed: 5-500mm/min infinitely variable speed

Displacement analysis accuracy: 0.01mm

Sensing system protection: rapid sensing protection device PROTEC SYSTEM

Sensor bottom fixing device: The sensor fixing method is placed at the bottom of the lower fixture, avoiding the traditional method of placing it at the bottom of the upper fixture. As the upper fixture can move up and down at any time, it will affect the overall stability of the sensor

Distance limit: The high-precision distance limit switch is externally mounted and can be adjusted in real-time according to different material requirements

Transmission screw: precision ball screw with single column structure from Taiwan, China, China is adopted, and double guide rails and two-way laminated sliding structure are adopted inside to improve the overall stability

Print output: Optional industrial control laptop for data processing, Huang Zhiming operating software system, R232 interface
Dimensions: (L × W × H) 500 × 400 × 700 mm

Weight: Approximately 70kg

Power supply: 220V 50HZ

Composite film 180 ° peel strength testing machineTesting object/applicable materials

A professional equipment for testing the peel strength of composite materials such as plastic film, rubber, and paper, widely used in industries such as packaging, medicine, and food.