180° Peel strength tester

Product introduction of tape peeling strength testing machine:

The 180 ° peel strength tester is specialized for testing the peel and tensile properties of adhesives, adhesive tapes, stickers, protective films, release papers, composite films, synthetic leather, woven bags, films, paper and other related products.

Technical parameters are for reference only. For specific details, please call for consultation:

Capacity selection: (6~300) N for tensile testing of paper and other materials, etc
Unit switching: gf, kgf, N, LBf, kN
Load decomposition degree: 1/800000
Load accuracy: within ± 0.5%

Power accuracy: ≤ 0.01N

Force resolution: 0.01N

Test range of experimental force: 0.4% -100% FS

Accuracy of indication: indication error ± 1%, indication variability ≤ 1%

Extension measurement range: (0-130) mm (at a standard test length of 180mm)
The most Large stroke: 400mm without fixtures

Gap spacing positioning error ± 0.5mm

Reset error of moving chuck ± 0.1mm

Sample width: ≤ 25mm
Test speed: (5-500) mm/min (computer input speed)

Return speed: 5-500mm/min infinitely variable speed

Displacement analysis accuracy: 0.01mm

Sensing system protection: rapid sensing protection device PROTEC SYSTEM

Sensor bottom fixing device: The sensor fixing method is placed at the bottom of the lower fixture, avoiding the traditional method of placing it at the bottom of the upper fixture. As the upper fixture can move up and down at any time, it will affect the overall stability of the sensor

Distance limit: The high-precision distance limit switch is externally mounted and can be adjusted in real-time according to different material requirements

Transmission screw: precision ball screw with single column structure from Taiwan, China, China is adopted, and double guide rails and two-way laminated sliding structure are adopted inside to improve the overall stability

Print output: Optional industrial control laptop for data processing, Huang Zhiming operating software system, R232 interface
Dimensions: (L × W × H) 500 × 400 × 700 mm

Weight: Approximately 70kg

Power supply: 220V 50HZ

Original device configuration:

Exterior Material: High grade baked paint

Display device: computer display screen

Power system: servo motor+servo driver+ball screw+synchronous belt drive

Load element: American power transmission sensor

Control system: using TM2101C system software

Test fixture: stainless steel or aluminum alloy

Bearing: Taiwan, China precision bearing

Safety devices: overload emergency stop device, upper and lower travel limit device, leakage automatic dissipation device

Accessory devices: one power cord, one operating manual, one data cable, and one set of standard fixtures. (Comes with a set of software)

Widely used in industries such as packaging printing, adhesive products, electronics, automotive, light industry, building materials, etc. Typical test samples include:

Adhesive types: double-sided tape, foam tape, high-temperature tape, masking tape, cloth tape, self-adhesive tape, etc;

Packaging composite: plastic composite film, aluminum-plastic composite film, aluminum plated film, food packaging film, composite flexible packaging, etc;

Label categories: self-adhesive labels, thermal labels, barcode labels, food labels, etc;

Others: automotive interior adhesive parts, electronic component adhesive, waterproof membrane bonding layer, aluminum-plastic panel composite layer, leather composite layer, etc.

Dongguan Zhongyi Precision Instrument Co., Ltd. ZY-BL30180 ° peel strength testerAlso known as peel strength tester, 180 degree peel tester, peel strength tester, film peel tester, tape peel strength tester.