Coating Thickness Gauge

1、 Product Overview

LCT-2000 seriesCoating Thickness GaugeIt is the crystallization of high-tech, adopting single-chip technology, with high precision, digital display, stable indication, low power consumption, simple and convenient operation, no calibration knob, single probe full range measurement, small size, and light weight; And it has storage, readout, and low voltage indication, and its performance reaches the level of contemporary similar instruments.

2、 Application scope

This instrument adopts magnetic thickness measurement method, which can conveniently and non destructively measure the thickness of non-magnetic coatings on ferromagnetic materials, such as zinc, copper, chromium coatings on steel surfaces or coatings of paint, enamel, fiberglass, spray coating, asphalt, etc. This instrument is widely used in industries such as machinery, automotive, shipbuilding, petroleum, chemical, electroplating, spraying, enamel, plastics, etc.

IIICoating Thickness Gaugeworking principle

The LCT-2000 series coating thickness gauge uses electromagnetic induction method to measure the thickness of coatings. The probe located on the surface of the component generates a closed magnetic circuit, which will change to varying degrees as the distance between the probe and the ferromagnetic material changes, causing changes in magnetic resistance and probe coil inductance. This principle can be used to accurately measure the distance between the probe and the ferromagnetic material, that is, the thickness of the coating (plating) layer.

4、 Technical parameters

Measurement range:
LCT-2001 type: 0-1500um
LCT-2002 type: 0-5000um
LCT-2003 type: 0.05-10mm

Measurement error:<3% ± 1 μ m

◆Small indication: 1 μ m.

Display mode: dot matrix.

Main functions: measurement, storage, reading, statistics, and sound and light alarm prompts.

Power supply: One 1.5V battery.

◆ Dimensions: 128 * 62 * 26mm.

Equipped with RS232 interface, it can upload data for printing and automatically shut down.