Welcome Customer !

Membership

Help

Jiangsu Deyuan HVAC Equipment Co., Ltd
Custom manufacturer

Main Products:

instrumentb2b>Products

Jiangsu Deyuan HVAC Equipment Co., Ltd

  • E-mail

    ksdy1000@126.com

  • Phone

    18761986602

  • Address

    No. 15 Lianhua Road, Wujiang District, Suzhou City

Contact Now

Circular muffler

NegotiableUpdate on 05/07
Model
Nature of the Manufacturer
Producers
Product Category
Place of Origin

Overview

Circular muffler

Product Details

\\

Muffler is one of the effective measures to control aerodynamic noise, which is a common source of noise pollution in ventilation and air conditioning equipment. Installing a muffler can reduce noise pollution. A muffler is a device that allows airflow to pass smoothly while effectively preventing or reducing the outward propagation of sound energy. The muffler should meet the following 5 requirements:
a、 Acoustic performance requirements: It should have good noise reduction characteristics, sufficient noise reduction within the required frequency range under certain working environments such as flow rate, temperature, humidity, pressure, etc., or be able to meet the required noise reduction within a wide frequency range.
b、 Aerodynamic performance requirements: The resistance of the muffler to the airflow should be small, the resistance coefficient should be low, the airflow regeneration noise generated when the airflow passes through the muffler should be low, and the muffler should not affect the normal operation of the aerodynamic equipment.
c、 Structural performance requirements: The muffler should have a small volume, light weight, simple structure, and be easy to process, install, and maintain.
d 、 Appearance and decoration requirements: The muffler should have a beautiful and elegant appearance, and its volume and shape should meet the overall layout requirements of the equipment.
e 、 Comprehensive requirements: Mufflers should be inexpensive and have a long service life. When selecting, a comprehensive analysis and evaluation should be conducted to coordinate the requirements of all parties and determine the best solution.
The installation of mufflers should meet the following requirements:
a、 The interface of the muffler should be firm: The muffler should be installed on the equipment or pipeline that needs to be silenced, and the connection of the muffler should be firm. Heavy mufflers should be supported on specialized load-bearing frames, and attention should be paid to the strength and rigidity of the support frames.
b、 Other noises should be prevented from entering the rear end of the muffler: Noise radiated from the casing or some pipes of the muffler equipment may enter the rear end of the muffler, resulting in a decrease in the muffler effect. If necessary, sound insulation treatment can be applied to the muffler casing or some pipes. In ventilation and air conditioning systems, mufflers should be installed as close as possible to the room where they are used, and exhaust mufflers should be installed as close as possible to the pipe section where the airflow is balanced.
c 、 Precautions for installation site of muffler: When the muffler is used outdoors, a rain cover should be added, and a filter should be added in areas with dust. A general ventilation muffler should have a gas dust content of less than 150mg/m3 and should not allow water mist, oil mist, or corrosive gases to pass through.
The types of mufflers include ZP100 muffler, ZG resistive tube muffler, WX microporous plate muffler, muffler elbow, and muffler static pressure box.