- Phone
-
Address
11th Floor, Building 5, No. 8 Liqing Road, Chaoyang District, Beijing
Product Categories
Beijing Fangshi Yasheng Technology Development Co., Ltd
Chlorine micro water analyzer
NegotiableUpdate on 05/06
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The chlorine micro water analyzer is used as an internal probe type thermal mass flow controller option, which can automatically maintain a correct flow rate for high accuracy. Another advantage of this option is the flow alarm to ensure that the analyzer and sampling system are always in the correct configuration.
Product Details
The chlorine micro water analyzer has a special design, and the analyzer with a microprocessor control adopts our high-quality P2O5 water measurement probe, bringing flexibility to your process environment. The MM520 acidic gas moisture analyzer can provide remote probes and select dew point units (℃ or ℉) or ppm for measuring water content in almost all corrosive gases, such as chlorine gas (Cl2), hydrogen chloride (HCl), hydrogen sulfide (H2S), sulfuric acid gas (H2SO4), hydrogen bromide (HBr), sulfur dioxide (SO2), etc., ranging from 0.1ppm to 1000ppm. The thermal mass flow controller option for internal probe type can automatically maintain a correct flow rate for high accuracy. Another advantage of this option is the flow alarm to ensure that the analyzer and sampling system are always in the correct configuration.
MM520Chlorine micro water analyzerYou can choose a remote probe to meet your needs. The general probe P2O5 includes a wall mount bracket with a flow valve for easy installation. A simple coaxial cable can connect the probe to the analyzer. It can be installed at a distance of 100m from the analyzer. You can also choose the option of automatic verification check. The analyzer can be connected to the gas being calibrated and programmed to perform periodic calibration checks. If the error exceeds the preset limit, the analysis will display warnings and fault alarms.
Technical specifications of MM520 chlorine micro water analyzer:
Measurement range: 0.01ppm~10ppm~100Pppm~1000ppm and dew point equivalent, automatic switching, can expand the range to 7000ppm
Response time: 90% within 60 seconds
Optional units: Dew point ℃/Dew point ℉/ppm (v)
Display type: 5-digit high-definition LED
Process connection: 1/8 "OD card sleeve, stainless steel
Sample pressure: 0.25~7.0 Bar
Sample flow rate: 100cc/min - controllable
Working conditions: The ambient temperature of the sample box is 0-40 ℃ (32-104 ℉) (additional temperature control devices are required for others)
Power requirements: 115/230VAC, 50/60Hz
Analog output: 0-10V, 0-100mV or 4-20mA optional, all isolated outputs
Options:
High/Low Automatic Alarm: Electric Shock Power 240V3A
19 "rack installation: It can be used in conjunction with some of our other products in the 19" rack installation configuration
Remote transmission probe: The universal probe can be installed at a distance of 1km for remote transmission
Flow control: thermal mass flow controller, regulator, bypass flow controller
