Changzhou constant temperature oscillation incubator manufacturer

Precautions and maintenance of Changzhou constant temperature oscillation incubator manufacturer: 1. The instrument should not be used under high voltage, high current, and strong magnetic field conditions to avoid interference with the temperature controller and the risk of electric shock. two The outer shell of the incubator must be effectively grounded for safe use. This product has undergone strict debugging before leaving the factory, and the temperature controller menu setting data should not be modified arbitrarily. four Do not place flammable and explosive materials for heating to prevent danger. five Electroplated parts and surface paint should be kept clean regularly. If not in use, neutral grease or Vaseline should be applied to the plated parts to prevent corrosion. A plastic film dust cover should be placed outside the incubator and placed in a dry room to prevent damage to the temperature controller caused by moisture.

1. The instrument should not be used under high voltage, high current, and strong magnetic field conditions to avoid interference with the temperature controller and the risk of electric shock.

2. The outer shell of the incubator must be effectively grounded for safe use.

This product has undergone strict debugging before leaving the factory, and the temperature controller menu setting data should not be modified arbitrarily.

4. Do not place flammable and explosive materials for heating to prevent danger.

5. Electroplated parts and surface paint should be kept clean regularly. If not in use, neutral grease or Vaseline should be applied to the plated parts to prevent corrosion. A plastic film dust cover should be placed outside the incubator and placed in a dry room to prevent damage to the temperature controller caused by moisture.

Do not place items with high acidity or alkalinity to prevent damage to the container.

Changzhou constant temperature oscillation incubatorUsage and operation methods

1. Connect the power supply, press the power switch, and the power indicator light will turn on.

2. Operators need to carefully read the instructions, understand and familiarize themselves with the functions of the incubator before turning on the power.

When the temperature displayed in the incubator reaches the set temperature, the heating is interrupted and the heating indicator light goes out. After being powered on for 90 minutes at the standard ambient temperature, the temperature can remain stable. If the temperature inside the incubator exceeds the set upper limit alarm temperature (factory set to 5 ℃), the temperature tracking alarm indicator light of the temperature controller will light up, and the heater power will be automatically cut off.

4. Adjust the temperature controller to the set temperature value required by the user (this value should be higher than room temperature plus 50C).

When opening the glass door to take samples, the heater and circulating fan will stop working. Only after closing the glass door can the heater and fan operate normally, which can avoid contamination of the culture and temperature overshoot.