Ceramic tile fracture modulus flexural testing machine

NegotiableUpdate on 01/19

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The TKZ-10 ceramic tile fracture modulus flexural testing machine has the following features: 1. It meets the requirements of standard 5.35.4, where one rod can swing slightly and the other can rotate slightly around its axis. 2. It uses a 7-inch touch screen, which is easy to operate and has powerful functions. 3. It automatically calculates the fracture modulus and failure strength, and the results are clear at a glance. 4. Equipped with printer function, it can print data and average values, as well as individual test data and curves. 5. Unique linear guide design with stainless steel ruler for durability, accurate and convenient adjustment of left and right spacing, and smaller distance adjustment error compared to other homes without pointers. The sliding distance of the front and rear guide rails is consistent

Product Details

Ceramic tile fracture modulus flexural testing machine

I. Overview

This typeCeramic tile fracture modulus flexural testing machineThe anti bending machine (hereinafter referred to as the anti bending machine) adopts a three-point bending beam test to reflect the mechanical properties of the material based on the measured bending strength. It is mainly used to measure the bending strength of ceramic tiles and other materials, especially suitable for conducting bending strength tests on large-sized and high-strength ceramic tiles. It can also be used for determining the bending strength of brittle non-metallic materials such as marble slabs and glass slabs. Local symbolGB/T3810.4-2016Test Methods for Ceramic Bricks-第4Part: Determination of modulus of rupture and failure strength "and international standardsISO 10545-4:1995Ceramic Bricks-第4Part: Requirements for Testing Equipment in the Methods for Determining Fracture Modulus and Destructive Strength.This machine has the advantages of easy operation, smooth loading, high measurement accuracy, and intuitive reading.

2、 Main technical parameters

1.Experimental force:10000N

2.Minimum resolution of force value:0.1N

3.Measurement accuracy: superior to1Grade accuracy

4. Effective detection range:Experimental force1%-100%

5.Screw stroke: ≥100mm

6.Radius of support roller and pressure rollerR=15mm(Including outer bread)5mmThick rubber

7.Range of distance between two supporting rollers:80～980mm

8. Allowable size of test piece:100*100～1000*1000 mm

9.Dimensions: Approximately1160×560×1550(mm)

10.Displacement rate:0.05-50mm/min

11.Force rate:5-500N/s

12.Power Supply:AC 220V±10% 50Hz

3、 Performance advantages

1.meet the standard5.35.4Require one rod to be able to swing slightly and the other rod to rotate slightly around its axis

2.adopt7Inch touch screen, easy to operate, powerful functions

3.Automatically calculate the fracture modulus and failure strength, and the results are clear at a glance.

4.Equipped with printer function, it can print data and average values, as well as individual test data and curves

5.Unique linear guide design, with stainless steel ruler for long durability, accurate and convenient adjustment of left and right spacing, smaller adjustment error compared to other homes without pointers, and front and rear guide sliderconsistent