-
E-mail
13818624135@126.com
-
Phone
13818624135
-
Address
504, No. 14, Lane 550, Lianxi Road, Pudong New Area, Shanghai
Product Categories
Shanghai Kewang Industrial Co., Ltd
Carbon dioxide flame gas thermometer optris CTlaser F2
NegotiableUpdate on 01/03
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The optris CTlaser F2 $r $noptris CTlaser F2 infrared laser thermometer provides a special measurement wavelength for the temperature measurement of CO2 flame gas. This makes this thermometer suitable for processes such as combustion, waste incineration, or chemical reactors. The temperature range of the $r $n infrared thermometer is 200 ° C; C to 1650 C， And stainless steel probes can withstand 85 without cooling; C. Optional cooling and protection equipment ensures accurate temperature measurement even in harsh environments.
Product Details
Carbon dioxide flame gas thermometer optris CTlaser F2
The optris CTlaser F2 infrared laser thermometer provides a special measurement wavelength for temperature measurement of CO2 flame gas. This makes this thermometer suitable for processes such as combustion, waste incineration, or chemical reactors.
The temperature range of the infrared thermometer is 200 ° C to 1650 ° C, while the stainless steel probe can withstand 85 ° C without cooling. Optional cooling and protection equipment can ensure accurate temperature measurement even in harsh environments.
Product Specifications
Temperature resolution (digital) |
0.1K |
Exposure time (90% signal) (Note 3) |
10 ms |
Emissivity/gain (adjusted by setting keys or software) |
0.100 ~ 1.100 |
Transmittance/gain (adjusted by setting keys or software) |
0.100 ~ 1.100 |
Signal processing (specific parameters can be adjusted through setting keys or software) |
Peak hold, valley hold, average, extended hold threshold, and lag function |
Basic Parameters |
|
environmental level |
IP65（NEMA-4） |
ambient temperature |
Probe: -20 ° C~85 ° C (laser on at 50 ° C); Electronic box: 0 ° C~85 ° C |
Storage temperature |
Probe: -40 ° C~85 ° C; Electronic box: -40 ° C~85 ° C |
relative humidity |
10~95%, no condensation |
Vibration (sensor) |
-IEC 60068-2-6 (sinusoidal waveform)/- IEC 60068-2-64 (wideband noise) |
Impact (sensor) |
-IEC 60068-2-27 (25G and 50G) |
weight |
Probe: 600 g; Electronic box: 420 g |
Electrical parameters |
|
analog output |
0/4-20mA、0-5/10V、 Thermocouple J, K |
alarm output |
24 V/50 mA (normally open) |
optional |
Relay: 2 x 60 V DC/42 V AC; 0.4 A; optical isolation |
Digital output (optional) |
USB, RS232, RS485, Modbus RTU (serial communication protocol), Profibus DP (fieldbus multifunctional slave design), Ethernet |
Output impedance |
MA Max 500 Ω (DC 5-36 V); MV Min 100 k Ω (pure impedance load); Thermocouple 20 Ω |
signal input |
Programmable function input, used for external emissivity adjustment/environmental temperature compensation, triggering (holding function reset) |
cable length |
3m (standard), 8m, 15m |
power supply |
DC 8-36 V |
Current consumption |
Max 160 mA |
Laser 635 nm |
1mW， Open/close through electronic box or software |
Note 1 |
The temperature of the object is higher than 300 ° C |
Note 2 |
ε (emissivity)=1, response time: 1s |
Note 3 |
Dynamic adaptation at low signal levels |
Carbon dioxide flame gas thermometer optris CTlaser F2
Application areas of optris CTlaser F2 infrared thermometer
The Optris CTlaser F2 infrared thermometer is designed specifically for measuring the temperature of combustion gases. This thermometer is capable of measuring carbon dioxide gas up to 1650 ° C during combustion processes. This device is suitable for different processes such as waste incineration or chemical reactors.
| model |
temperature range |
temperature measurement accuracy |
response time |
distance coefficient |
spectral response |
| OPTCTLF2L |
200～1450℃ |
±1% |
10ms |
45：1 |
4.24μm |
| Optctlf 2 h |
400～1650℃ |
±1% |
10ms |
45：1 |
4.24μm |
| OPTCTLF6L |
200～1450℃ | ±1% |
10ms | 45：1 |
4.64μm |
| Optctlf 6 h |
400～1650℃ |
±1% |
10ms |
45：1 |
4.64μm |
| Operating Temperature |
Probe: -20~85 ℃, electronic box: 0~85 ℃ |
||||
| analog output |
0/4-20mA, 0-5/10V, J/K type thermocouple signal output |
||||
| digital output |
USB、RS232，RS485，CAN-Bus,Profibus DP, Ethernet 可选 |
||||
| emissivity |
0.100~1.100 software settings |
||||
| Connecting cable length |
3m, 8m, 15m optional |
||||
| signal processing |
Peak holding, valley holding, average value. |
||||
| power supply |
8～36VDC |
||||
| application |
Temperature of flue gas containing CO2 or CO gas in heating furnaces, boilers, and chemical reaction furnaces | ||||
