Calibration device for bonding strength tester of decorative tiles

1、 Instrument Introduction:

XR-MLB-10 typeCalibration device for bonding strength tester of decorative tilesIt consists of a standard force measuring instrument and a force testing platform. Used for calibration by various levels of metrology testing institutes and third-party calibration institutions for rivet pull-out testers and veneer brick bonding strength testers, and can also be used for tensile testing in other occasions.

2、 Technical parameters:

1. Accuracy level: 0.1 level;

2. Measurement range: 1~10kN;

3Calibration device for bonding strength tester of decorative tilesWith 20 logical channels, it can easily expand the force measurement range for force calibration in other situations;

4. Capable of peak measurement function;

5. It can store 200 sets of measurement data, and the stored data can be queried and deleted;

6. Logical channels, measurement units convertible, standard RS-232 communication interface;

7. Equipped with simulation calibration, calibration data recovery, and migration functions;

8. The force test bench is a 4-pillar portal structure with horizontal beams for mobile loading;

9. Adopting fast and slow two-stage transmission. When unloaded, the crossbeam can be quickly moved, greatly improving work efficiency. When loading, it can be loaded slowly to ensure accurate and stable loading accuracy;

10. Special fixtures can conveniently, quickly, and reliably fix the drawing instrument to the moving crossbeam;

11. The pull-out tester is subjected to tensile force, which can ensure testing accuracy and eliminate the problem of difficult alignment of hooks;

12. Working power supply: AC220V ± 10%, 50Hz;

13. Working environment: temperature 0~40 ℃, humidity<90% R.H.

3、 Instrument configuration:

1. 1-10KN tension sensor: 1 unit;

2. Measurement display: 1 unit;

3. Loading test bench: 1 unit;

4. Connecting attachments: 1 set;

5. Instrument specific aluminum box: 1 piece;

6. Instrument qualification certificate: 1 copy;

7. Operation manual: 1 copy;

8. Instrument warranty card: 1 copy;

9. Instrument packing list: 1 copy.

4、 Instrument after-sales service:

1. Technical Services:

1.1 The seller is responsible for the transportation, loading and unloading, installation, and commissioning of the equipment, and the responsibility and expenses shall be borne by Party B;

After the equipment malfunctions, Party B shall respond to customer needs within 2 hours and complete the repair task within 7 days;

After the installation and debugging of the equipment is completed, the manufacturer is responsible for technical training to ensure that the users of Party A can proficiently master the equipment principles, usage methods, and maintenance methods.

2. Quality assurance period:

2.1 The warranty period is 12 months from the date of product acceptance;

2.2 Lifetime maintenance of equipment, free upgrade of equipment control software, and maintenance services provided by Party B outside the warranty period will only be charged for the cost of parts, and all expenses of its staff will be borne by Party B.