- Phone
-
Address
Jianshe West Road, Tiexi District, Shenyang City, Liaoning Province
Product Categories
Shenyang Mulun Technology Co., Ltd
CS-r carbon/sulfur analyzer
NegotiableUpdate on 05/06
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The ELEMENTRAC CS-r carbon/sulfur analyzer determines carbon and sulfur elements by burning the sample in an oxygen stream and subsequently measuring the combustion gases CO2, SO2, and H2O in a selective infrared measurement cell. The sample weight of up to 500 milligrams ensures excellent reproducibility of elemental analysis results, even for complex sample mixtures.
Product Details
For the safe, accurate, and reliable analysis of carbon (C) and sulfur (S) elements in major organic matrices such as soil, waste, wood, oil, coal, and coke, ELTRA provides the ELEMENTRAC CS-r combustion analyzer with infrared detection.
ElementracCS-r carbon/sulfur analyzerEquipped with up to 4 infrared units, designed for measuring carbon and sulfur over a very wide concentration range. It adopts a horizontal resistance furnace with ceramic tubes, with a working temperature range of 600 ℃ to 1550 ℃.
ElementracCS-r carbon/sulfur analyzerMeets or exceeds the elemental analysis requirements of all common ASTM, DIN, EN, or ISO standards.
Advantages:
▏Quickly and simultaneously measure carbon and sulfur
▏Can achieve analysis of large scale samples
▏Optimize (low blank) sample port
▏IR gold-plated detector, extending service life
▏Wide measurement range, from 20ppm to 100%
Typical sample materials:
Biomass, building materials, coal/coke, fuel, oil, ore, plant materials, plastics, rubber, soil, coal smoke, tobacco, waste, etc.
Working principle:
In the element analyzer CS-r, the sample is burned in an oxygen environment at a temperature of up to 1550 ℃. The furnace temperature can be adjusted in units of 1 ℃. The burning gases (CO2, H2O, SO2) come out of the furnace and pass through a dust filter. After the water vapor is absorbed by the purification tube, dry CO2 and SO2 gases are detected in the infrared detector. Depending on the configuration, up to four infrared detectors with different sensitivities (for C and S analyzers) can be combined.
Technical parameters:
| Analyze elements | Carbon, sulfur |
| sample | Organic samples |
| Furnace calibration | horizontal (resistance furnace) |
| Sample loading | Ceramic Boat |
| application field | Agriculture, biology, chemistry/plastics, coal/power plants, building materials, environment/recycling, medicine/pharmaceuticals |
| stove | Resistance furnace (ceramic tube), temperature up to 1550 ° C (1 ° C adjustable) |
| Detection method | Solid state infrared absorption |
| Number of infrared detection pools | 1 - 4 |
| Infrared detection pool material | gilding |
| Typical analysis time | 60 - 180 s |
| chemicals | Magnesium perchlorate* |
| carrier gas | 99.5% pure oxygen (2-4 bar/30-60 psi) |
| power requirement | 230 V, 50/60 H, Working current up to 20 A |
| Equipment dimensions (width x height x depth) | 58 x 52 x 75 cm |
| weight | ~ 77 kg |
| Required equipment | Computer, monitor, balance (accuracy 0.0001 grams) |
| Optional accessories | TIC module |
Reserve the right to make technical changes and errors
