-
E-mail
ametek-tci@bjqsjj.com
-
Phone
138-1102-4318
- Address
Product Categories
Ametec Corporation, USA
CPF pressure fittings
NegotiableUpdate on 06/23
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
CPF Pressure Fitting Overview Description Details Technical Specification Description CPF is the abbreviation of CrystalPressureFittings, which is a new series of connectors used for fast, safe, and sealed connections
Product Details
CPF pressure fittings
describe
CPF stands for Crystal Pressure Fitting, a new series of connectors designed for fast, safe, and sealed connections.
When CPF connectors are connected to each other, no tools are required. They can be tightened by hand to withstand a working pressure of up to 70MPa. If metal to metal sealing (for medium compatibility) is required, simply tighten with a wrench.
To the top of the page
details
1．-Within a temperature range of 20~50 ℃, sealing under a working pressure of 100MPa can be achieved by hand twisting
2．-Within a temperature range of 40~150 ℃, tightening with a wrench can achieve sealing under a working pressure of 100MPa
3．Can be combined with other threadsM20×1.5, NPT, BSP and other direct connections, no special conversion required
4．Laser marking, clear identification of connectors
5．The safety exhaust vent with sound can indicate the situation of compressed connection, ensuring safe operation
6．The safety factor of the pipeline is4: 1. Far higher than the commonly used coefficient of 2.5:1
7．The pressure hose is designed specifically for calibration, with an inner diameter of only2mm， Suitable for pneumatic and hydraulic systems
To the top of the page
TECHNICAL INDEX
1. Sealing performance:
-20~50 ℃: Hand twisted to seal under a working pressure of up to 100MPa;
-40~150 ℃: The seal can be tightened with a wrench up to 100MPa working pressure;
2. Pipeline safety factor:4: 1 (The commonly used coefficient in the industry is 2.5:1)
3. Inner diameter of pressure hose:2mm
4. texture of material:316SS
Common connectors
1. CPF pressure conduit
ØMPH-1m pressure pipe with CPF external thread joint
ØMPH-1.5:1.5m pressure pipe with CPF external thread joint
ØMPH-2:2m pressure pipe with CPF external thread joint
ØMPH-3: 3m pressure pipe with CPF external thread joint
ØMPH-5: 5m pressure pipe with CPF external thread joint
ØMPH-10:10m pressure pipe with CPF external thread joint
2. CPF-NPT conversion head
ØMPF-1/8QTF
ØMPF-1/8QTM
ØMPF-1/8MPT
ØMPM-1/8MPT
ØMPF-1/4QTF
ØMPF-1/4QTM
ØMPF-1/4MPT
ØMPM-1/4MPT
ØMPF-1/4FPT
ØMPF-1/2QTF
3. CPF-BSP conversion header
ØMPF-1/8BSPF
ØMPF-1/4BSPF
ØMPF-3/8BSPF
ØMPF-1/2BSPF
ØMPM-1/8BSPM
ØMPM-1/4BSPM
ØMPM-3/8BSPM
ØMPM-1/2BSPM
4. CPF-CPF connector
ØMPM-MPM
ØMPF-MPF
ØMPF-CAP
ØMPM-PLUG
5. CPF metric connector
ØMPF-M20QTF
ØMPF-M20x1.5F
ØMPFM-M20x1.5M
6. CPF set
Ø4013（Quick Test NPT Kit）
Ø4015（Quick Test BSP Kit）
Note: Among the above models
ØMPF is CPF internal thread
ØMPM is CPF external thread
ØQTF is an internal thread quick connector
ØQTM is an external thread quick connector
ØMPT is NPT external thread
ØFPT is NPT internal thread
Disclaimer: The above product technical parameters and images are for selection reference only and do not have legal effect in bidding and other business activities. Please refer to the specific selection and technical solutions provided by our sales representative or technical personnel.
To the top of the page
