CO2 incubator

CO2 incubatorIt consists of a painted outer shell, a stainless steel working chamber, and an electronic control part; When in use, it must be equipped with a carbon dioxide cylinder (special gas users should bring their own) and a carbon dioxide pressure reducing valve. Pure carbon dioxide gas enters the box after being stabilized by the pressure reducing valve.

Usage Overview:

Incubator is an instrument used for culturing cells, tissues, and bacteria. It is a key equipment necessary for conducting immunology, oncology, genetics, and bioengineering, widely used in research and production of microbiology, agricultural science, and medical experiments.

Product Features:

1. Humanized design

Large screen LCD display, multiple sets of data displayed on one screen, menu style operation interface, simple and easy to understand, convenient to operate. (Type II)

2. Stackable placement (two layers), easy to fully utilize laboratory space, microcomputer controller, precise and reliable control of stainless steel liner and partition, four corner semi-circular transition, shelf bracket can be freely installed and removed, easy to clean the studio.

3. Microbial high-efficiency filter

The CO2 inlet is equipped with an efficient microbial filter, which has a filtration efficiency of up to 99.99% for particles with a diameter greater than or equal to 0.3um, effectively filtering bacteria and dust particles in CO2 gas.

4. Door temperature heating system

The CO2 incubator can heat the door to raise the temperature of the inner glass, effectively preventing condensation water from the glass door and preventing the possibility of microbial contamination caused by condensation water from the glass door.

Faster CO2 concentration recovery speed (Type II has this function)

5. The monitoring of CO2 concentration by infrared sensors is not affected by temperature and humidity. When frequent opening of the box door is required during the experiment, infrared sensors are a good choice. If the door is opened for 30 seconds and then closed, it can recover to the set temperature of 37 ℃ within less than 10 minutes, and recover to the set CO2 concentration of 5% within less than 5 minutes of potassium. Even in situations where multiple people need to frequently open and close the door, it can still maintain the stability and uniformity of the CO2 concentration inside the box.

6. ConfigurationCO2 incubatorSecondary pressure reducing valve, effectively ensuring intake pressure

7. UV sterilization system (optional)

The ultraviolet sterilization lamp is located on the back wall of the box and can regularly disinfect the inside of the box. It can effectively kill circulating air and steam floating bacteria in the humidification tray inside the box, thereby effectively preventing contamination during cell culture.

8. Independent temperature limit alarm system (optional)

If the temperature exceeds the limit, the operation will be automatically interrupted and an audible and visual alarm will be triggered to alert the operator. Ensure the safe operation of the experiment without any accidents.

9. Convenient data processing (optional)

Equipped with USB or RS485 interfaces, it can connect to printers or computers and record changes in temperature parameters. (Optional)

Technical parameters:

Our company can also provide customers with: constant temperature and humidity incubators, water-resistant incubators, biochemical incubators, mold incubatorsCO2 incubator3Q verification service for electric blast drying oven, as well as temperature and humidity verification service and provision of third-party CMA testing reports.