CMT6104 Plastic Pulling Machine

The CMT6104 plastic tensile machine uses high-precision sensors to accurately control, measure, automatically display, and record the deformation of the load and specimen, as well as the displacement of the crossbeam. The program controls and processes the test results.

This device adopts a single space structure, with a space type of lower space, mainly composed of a host (including rack, base, transmission system), fixtures, deformation measurement system, software system, and electrical system.

The computer system of this device controls the servo motor to rotate through a controller. After being decelerated by a reduction system, the precision screw pair drives the moving crossbeam to rise and fall, completing various mechanical performance tests such as tensile, compressive, and bending of the sample. High precision sensors are used to accurately control, measure, automatically display, and record the deformation of the load and specimen, as well as the displacement of the crossbeam. The program controls and processes the test results.

Equipment meets the following standards:

1. Testing machine standard: HG/T 2369-1992 Technical conditions for rubber and plastic tensile testing machine

2. Test method standard:

GB/T 1040.1-2018 Determination of Tensile Properties of Plastics Part 1: General Principles

GB/T 1040.2-2022 Determination of Tensile Properties of Plastics Part 2: Test Conditions for Molding and Extrusion Plastics

GB/T 1040.3 Determination of Tensile Properties of Plastics Part 3: Test Conditions for Thin Films and Sheets

Technical Specifications:

1. Maximum test force: 10kN;

2. Accuracy level of testing machine: 0.5 level;

3. Test force measurement range: 0.4% -100% FS, no grading throughout the entire process;

4. Relative error of test force indication: within ± 0.5% of the indication;

5. Experimental resolution: 1/± 500000 of the maximum experimental force (with constant resolution throughout the entire process);

6. Deformation measurement range: 0.2% -100% FS;

7. Relative error of deformation indication: within ± 0.5% of the indication;

8. Deformation resolution: 1/± 500000 of the maximum deformation amount;

9. Relative error of displacement indication: within ± 0.5% of the indication;

10. Displacement resolution: 0.001mm;

11. Range of force control rate adjustment: 0.005-5% FS/S;

12. Relative error of force control rate: within ± 0.5% of the set value;

13. Deformation rate adjustment range: 0.02-5% FS/S;

14. Relative error of deformation control rate: When the rate is less than 0.05% FS, it is within ± 1% of the set value; When the rate is ≥ 0.05% FS, it is within ± 0.5% of the set value;

15. Beam speed adjustment range: 0.001-500mm/min;

16. Relative error of crossbeam speed: within ± 1.0% of the set value when the speed is less than 0.01mm/min; When the speed is ≥ 0.01mm/min, within ± 0.5% of the set value;

17. Constant force, constant deformation, constant displacement control range: 0.5% -100% FS;

18. Constant force, constant deformation, and constant displacement control accuracy: When the set value is less than 10% FS, it is within ± 1% of the set value; When the set value is ≥ 10% FS, it is within ± 0.5% of the set value;

19. Effective stretching space: 700mm;

20. Effective test width: 340mm;

21. Overall dimensions of the host (length x width x height): 600 x 465 x 1510 (mm);

22. Power supply: 220V ± 10%, 400W;

23. Host weight: 100kg.