CHIRALPAK OP (+) OT (+) poly (methyl methacrylate) chiral column

CHIRALPAK OP (+) OT (+) poly (methyl methacrylate) chiral columnProduct Parameters:

CHIRALPAK ® OP(+)：

Packing particle size:10Mm

StressCHIRALPAK ® OP(+)The upper limit of pressure is5MPa.

temperature0~35℃ (the lower the temperature, the better the separation effect)

Preservation solvent:n-Hexane=100 . %

CHIRALPAK® OT(+)：

Packing particle size: 10 μ m

Pressure: CHIRALPAK ® The upper limit of OT (+) pressure is 5MPa.

Temperature: Depending on the composition of the mobile phase, please refer to the instruction manual for details.

Storage solvent: n-Hexane=100 %

CHIRALPAK OP (+) OT (+) poly (methyl methacrylate) chiral columnProduct Introduction

CHIRALPAK ® OP(+)For the chiral column of poly (methyl methacrylate), poly (diphenyl-2-pyridylmethyl methacrylate) was coated on the surface of 10 μ m silica gel.

Mobile phase:

The separation effect is better when 100 methanol is used as the mobile phase.

Ethanol cannot be used.

CHIRALPAK® OT(+)For the chiral column of poly (methyl methacrylate), poly (triphenylmethyl methacrylate) was coated on the surface of 10 μ m silica gel.

Mobile phase:

It is recommended to prioritize using methanol as the eluent.

When methanol is replaced with ethanol, the peak time is usually advanced.

Because alcohols have dissociation effects, a higher column temperature than the recommended value can damage chiral columns. It is recommended to use this chiral column at lower temperatures (0-5 ℃).

Ordering information:

CHIRALPAK^®OP(+)

CHIRALPAK^®OT(+)