CANHUB-P4 CAN Bus Hub Router

CANHub-P4 is an industrial grade intelligent four channel CAN bridge repeater developed by Beijing Anrong Communication Technology Co., Ltd. The CAN bus hub router intelligent 4-channel CAN bridge has 4 electrically isolated CAN bus interfaces, which can realize data reception/storage/forwarding between 4 independent CAN networks with different speeds; Can filter out unwanted CAN messages and reduce the load on the subnet; It can also route messages transmitted between subnets. The CAN bus hub router implements functions such as changing the CAN network topology, extending network communication distance, and increasing the number of nodes. The four CAN channels of CANHub-P4 can operate at different baud rates, and CANHub-P4 complies with CAN specifications 2.0A (11 bit CAN identifier) and 2.0B (29 bit CAN identifier). Supports transparent and protocol independent CAN message transmission, suitable for various applications. In addition, it can be used for various high-level protocols such as CANopen, SDS, J1939, DeviceNet, etc. The CAN bus hub router can be configured with a CAN message receiving filter, which ensures that only the required data is transmitted to other CAN networks through the relay. CANHub-P4 can be configured by connecting to a PC through an asynchronous serial communication interface. By using the "CAN Configuration Tool" to configure software settings such as CAN channel baud rate, CAN message reception filtering, etc., it is easy to use, supports instant effectiveness, and can be put into operation without any operation after device configuration is completed.