Broad spectrum induction water processor, circulating water full channel processor

Broad spectrum induction water processor, circulating water full channel processorWorking Principle:
The MBLT-DR series broad-spectrum induction electronic water processor, also known as the winding electronic water processor, consists of two parts: the processor host and the signal cable
Composition: The host is used to generate a series of specially processed full frequency composite oscillation waves, and the signal cable is wrapped around it
On the outer wall of the water pipeline that needs to be treated, the composite oscillation wave signal passes through the signal wrapped around the outer wall of the pipeline
The cable forms a composite magnetic field synchronized with the composite oscillation wave inside the pipeline, allowing it to flow through the section of the pipe
All water bodies in the Dao are subject to the action of a composite magnetic field, which causes the water bodies to be subjected to depth refinement and depth reduction
The chemical properties of the refined water body have not changed in any way, but the physical properties of its molecular structure have been developed
A fundamental change has occurred. The vast majority of water bodies in nature originally existed in the form of large particle molecular clusters,
After being subjected to magnetic fields with special frequencies and field strengths, most large particle molecular clusters are affected by various valences
Bond association (hydrogen bond, oxygen bond, hydrogen oxygen bond, etc.) undergoes resonance when excited by a magnetic field of the same frequency
The valence bonds that generate resonance will gradually break, forming most of the single molecules and a small amount of small molecule clusters.
After the molecular clusters of large particles are refined, the water body reacts with various scaling ions (calcium, magnesium, metal) suspended in the water
The solubility of cations, various negative ions, and scale components has been significantly improved, exhibiting strong
The permeability and dissolution ability of the original old scale gradually dissolve and remove it, while preventing new scale from forming again
Generate and achieve the ability of pure physical methods to remove and prevent scale.
The composite magnetic field has good sterilization and algae removal ability for the water flowing through it, and generally has a sterilization and algae removal rate
It can reach over 80%.

Water subjected to a composite magnetic field undergoes changes in the molecular cluster structure, resulting in the formation of reactive oxygen species in the water
The state has changed, therefore such water bodies have the ability to remove rust and inhibit corrosion of the metal pipelines flowing through them.
The composite signal generates a corresponding composite magnetic field through the signal cable on the outer wall of the pipeline, which acts on the flow through the pipeline
Water bodies are treated using purely physical methods without altering their chemical composition
Characteristics: No need for medication, no need to shut down or damage pipelines during equipment installation.
The electronic water processor adopts "full bandwidth band" technology, which is based on DDS technology
The segmented signal frequency changes rapidly, and several high-speed frequency changing signals are based on a high-frequency fundamental wave
Overlay to form a continuous composite electromagnetic field signal, forming various frequency points within the frequency range
The electromagnetic field is continuous and uninterrupted, and there will be no magnetic field gaps caused by frequency changes in water treatment
No, it applies continuous and uninterrupted composite electromagnetic field signals to the treated water body, covering various types of water
The valence bond oscillation frequency of the quality condition, therefore the treatment effect of this series of water processors is basically not affected by changes in water quality
The impact of changes in water temperature, pressure, flow rate, viscosity, hardness, turbidity, pH value, and other conditions
The fluctuation of valence bond vibration frequency of water molecules enables any changing water body to be treated
To achieve ideal functions of anti scaling, descaling, sterilization, algae killing, rust removal, and corrosion inhibition;

Broad spectrum induction water processor, circulating water full channel processorApplication fields:
※ Central air conditioning circulating water system ※ Industrial circulating cooling water system ※ Hot water boiler, low-pressure steam boiler
※ Injection molding system ※ Pool, sauna, fountain landscape ※ Water plant, power plant

Performance characteristics:
◎ Input power supply: AC220V/50Hz
◎ Working voltage:<36V
◎ Output frequency: 10Hz-500KHz
◎ Power consumption: 75W-600W
◎ Suitable for water quality: total hardness ≤ 700mg/L (calculated as CaCO3), water temperature<100 ℃, flow rate=5m/S
◎ Work pressure: 1.0/1.6Mpa
Anti scaling rate ≥ 98%, descaling rate ≥ 98%, sterilization and algae removal rate ≥ 95%, steel pipe corrosion rate ≤ 0.125mm/a
◎ Validity period: The water is effective for 3 hours after treatment
◎ Design lifespan: 15 years
The product quality meets the national industry standard HG/T3133-1998
Requirements of "Technical Conditions for Electronic Water Treatment Plants"

Broad spectrum induction water processor, circulating water full channel processorEquipment specifications:

Broad spectrum induction water processor, circulating water full channel processorInstallation location:
1. The principle for selecting the installation position of the winding cable for the full frequency composite signal output carrier of the electronic water processor:
A、 Try to get as close as possible to the water inlet of the equipment that needs to be cleaned and prevented from scaling. If it is a circulating system, it should be wrapped around it
The pipeline installed after the circulation pump;
B、 The surface of the pipeline to be installed should be clean, flat, without covering, insulation layer or lead paint, etc., wrapped
The surrounding pipeline must be a straight pipe;
C、 It should be kept as far away as possible (2 meters away) from high-power electrical equipment to prevent composite full frequency signals from being affected by magnetic field interference;
D、 The selected installation pipeline should be as perpendicular as possible to the axial direction of the water pump or motor to reduce interference
The possibility;
2. Determine the installation location of the host, which can be wall mounted, flat, or fixed on a pipeline. The host should be connected to the communication system
The closer the distance between the winding parts, the better. Generally, it cannot exceed 3 meters. If it exceeds, it must be specifically mentioned when placing an order
requirement;
4. Each machine is equipped with wiring plugs at both ends of each signal line, with LO and LI on each end of the plug
After wrapping the label, insert the plugs into the corresponding ports of LO and LI on the host (note: LO and LO)
Docking, LI docking), start winding from the LO end when installing winding;
5. Firstly, reserve a suitable length of connection between the LO end and the host, and secure the signal line with matching bundling tape
Tighten and secure the pipeline to prevent detachment;
6. This winding method conforms to the right-hand law of magnetic field, which means holding the inlet pipe with the right hand and using the direction of water flow as the direction of the right hand
Thumb pointing, other fingers pointing is the direction in which the cable begins to wrap, and the direction in which the cable extends
Consistent with the direction of water flow;
7. Single output type: winding in three sections, looking at the section in the direction of water flow, and winding clockwise at the same time
After winding the specified number of turns (according to the instruction manual), fix it with a tie tape and pull the cable directly onto the outer wall of the pipeline until it is fixed
The distance between each section is about 30cm, and the cable is fixed to the outer wall of the pipeline with bundling tape. Then, continue winding in the same direction
Specify the number of turns (must be in the same direction), then fix it with strapping, and pull the cable directly onto the outer wall of the pipeline again until it meets the requirements
Fix the cable at a distance of about 30cm (segment spacing), and continue winding the remaining part of the cable in the same direction, straight
To the appropriate length of the remaining connection with the LI end of the host, fix it with strapping, and complete the winding of this group

Broad spectrum induction electronic water processorNotes:
After installation, confirm that the water processor is in a full water state, connect the host to the power supply, and turn on the host control
The power switch on the panel, with all green indicator lights on, indicates that the device has entered working mode
The host part cannot be opened without the permission of professional personnel to prevent damage to the integrated circuit
The water that needs to be treated must all flow through the winding coil to ensure that the water processor works in a full water state
Before installation, the pipeline debris should be removed, and it is strictly prohibited to use iron hardware to collide with the water treatment host to avoid damaging the equipment