Bernard France K series three pole reversible contactor module

NegotiableUpdate on 05/14

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Bernard France's K series three pole reversible contactor module $r $n provides long-term discounted supply of DKJ/Z electric actuators and their spare parts: reducers, DKJ motors, integrated position generators, integrated control modules (DY-Z, SG-I), electronic locators (GAMX-2007, GAMX-2011), position transmitter modules (WFM-P, WF-01, WF-M, WF-130, WFM-01), potentiometers, etc.

Product Details

Bernard France K series three pole reversible contactor module

The intelligent digital electric actuator controller is a new generation of mechatronics products successfully designed by our company based on current microelectronics technology, electronics, and power devices. The intelligent digital electric actuator can adapt to various complex control system requirements and provide a variety of different types of products for the special functions of actual control system engineering.

Our company is established based on the modern enterprise system, integrating production, development, sales, and after-sales service. The company's leading products are the DKJ series, which introduces electric actuators such as the French Bernard SD series and ST series; Widely used in fields such as power, metallurgy, petroleum, chemical, cement, light industry, pharmaceuticals, mining, transportation, building materials, water treatment, etc.

Bernard France K series three pole reversible contactor module

Common faults and solutions of electric devices

1When fully open/closed, it cannot stay at the set stroke position, and the valve stem and valve body collide. The parameter of 'closing/opening valve limit LC/L0' has been lost and should be reset. Or change the parameter 'torque on/off' to 'limit on/off'.

2. Neither remote control nor local control operates, or the motor rotates unidirectionally and cannot be limited. Check that the automatic clutch is not stuck and the motor is not burnt: you can check if the motor power wiring is correct or if the three-phase power supply is unbalanced.

3. Neither remote control nor on-site operation, measuring motor winding, overheating protection. Electromagnetic feedback open circuit, motor burnt out.

4. When the three-phase power supply is turned on, it trips: there is a problem with the relay control board or the motor coil has been burned out.

5. The background light is not on. Check that the three-phase power supply is normal, it may be due to the actuator fuse being blown or the motherboard power cord being loose and not properly plugged in.