Battery thermal shock test chamber

★ Product Name: Battery Thermal Shock Test Chamber ★single bit: Taiwan

★ Model: JW-DCZC-200 ★Quantity:One

Specification Summary

Equipment technical parameters:

1. Internal dimensions: 600 (width) x 500 (depth) x 600 (height) mm;

2. The external dimensions are approximately 870 (width) x 720 (depth) x 1370 (height) mm, based on the actual product;

3. Control panel: The control panel is installed above the machine (as shown in the figure);

4. Door opening method: Single door opens from right to left;

5. Visual window: The door is equipped with a visual window, with specifications of W300 * H400mm;

6. The internal material is 304 # stainless steel mirror panel, with a thickness of 1.2mm;

7. The outer material is cold-rolled steel plate, with a thickness of 1.2mm. Powder baked paint treatment (wrinkles gray white);

8. Partition: Adjustable in two layers, starting from 100mm at the bottomLayer, divided equally above, with two distribution boards;

9. The insulation material is: high temperature resistant rock wool, with good insulation effect;

10. The sealing material is: high-temperature resistant foam silicone strip;

11. Test hole: One test hole with a diameter of 50mm is opened on the right side of the machine;

12. The machine platform is equipped with movable casters and adjustable fixed foot cups for easy movement and positioning

★guarantee solid period：warrantyOneyear.Regular free home maintenance four times a year

★Precautions：(The ambient temperature around the machine is maintained at+5~+30℃between，Your factory is responsible for arranging it next to the machinery and equipment on its own)

★air quality：No high concentration dust or corrosive gases，And it cannot be tested and stored in flammable and explosive gases

★electricity source：380 V 3phase50 HZ Voltage Range:not exceed±10%】