Baode Burkert Germany 8139 type - radar level gauge

Baode Burkert Germany 8139 type - radar level gaugeOverview

8139 type is a non-contact radar liquid level measurement device used for continuous liquid level measurement. It can be used for: - Integrated antenna (G or NPT connection), especially suitable for liquid level measurement of corrosive liquids, with special advantages for small containers. -Plastic horn antenna (with mounting bracket), especially suitable for measurement in open water tanks or in water meters. -Flange connection with sealed antenna system (DIN 2501), clamp connection with sealed antenna system that meets hygiene requirements (DIN 32676, ISO 2852). The high focus and high measurement dynamic characteristics of radar signals can provide excellent measurement results even in small, narrow, and high containers, greatly reducing the risk of signal interference in installation, construction, and ship walls. Signal attenuation, for example

Continuous liquid level measurement, maximum length of 30 meters, 4-20 mA, 2-wire system
Available process connections: plastic horn antenna, thread, flange, fixture (2 inches)
Excellent radar signal focusing and high measurement dynamics
Adjustments can be made using the display/configuration module and buttons, or through PC Tool with DTM

Baode Burkert Germany 8139 type - radar level gaugeType: Magnetic Float Type
1、 Overview: The UHZ-25 magnetic float level gauge and UHZ-27 top mounted float ball level gauge can be equipped with remote level transmitters to achieve digital/analog display of liquid level signals for remote transmission.
2、 The structural principle of MY type belongs to the analog liquid level transmitter, which consists of a liquid level sensor and a signal converter. The liquid level sensor consists of several reed switches and several resistors installed inside a φ 20 stainless steel protective tube, which is fastened to the outside of the measuring tube (main tube); The signal converter is composed of electronic modules and is placed in an explosion-proof junction box at the top or bottom of the sensor. 3. Main technical parameters: 1. Range: determined by the measurement range H; 2. Error: ± 10mm; 3. Output signal: 4-20mA.DC (two-wire system); 4. Load resistance: ≤ 550 Ω; 5. Power supply voltage: 24V DC; 6. Outlet: M20 × 1.5 (internal); 7. Environmental temperature: -40 to+60 ℃; 8. Explosion proof grade: dIIBT1-4; 9. Shell protection level: IP65.
3、 Characteristics of magnetic levitation ball level gauge
The magnetic levitation ball level gauge has the advantages of simple structure, convenient use, stable performance, long service life, and easy installation and maintenance.
4、 Application of Maglev Ball Liquid Level Gauge
It is mainly widely used for liquid level measurement in fields such as petroleum processing, food processing, chemical engineering, water treatment, pharmaceuticals, electricity, papermaking, metallurgy, ships, and boilers.
Internal floating
The internal floating dual chamber liquid level gauge (viscous medium liquid level gauge) is a liquid level measuring instrument developed for highly viscous media, using technology from Canada's JKS company. This product is a technological upgrade based on the magnetic float level gauge, overcoming many drawbacks such as inaccurate measurement of viscous media by the magnetic float level gauge for a long time, adhesion between the liquid inside the chamber and the float, and difficult maintenance.
The internal floating magnetic level gauge is a dual chamber level gauge, in which the measured medium is isolated from the cavity at the magnetic panel end. After special treatment, the interior of the container end cavity and the float ensure that the float linearly transmits to the magnetic panel with changes in liquid level, and clearly and accurately indicates the height of the liquid level. It can display on site, taking into account both alarm control and remote signal output. It is a multifunctional liquid level measuring instrument that measures the liquid level of viscous media.
Magnetic flap
The UHZ-45 high-temperature and high-pressure magnetic flap level gauge is designed by our company to expand the application range of the UHZ series magnetic flap level gauge and meet the requirements of industries such as power, heating, and gas supply more widely. It adopts a * heat dissipation method to effectively control the working temperature of the dielectric instrument, avoid demagnetization of magnetic components under high temperature conditions, and ensure reliable instrument operation. It can measure high temperature of 450 ℃ and high pressure of 25MPa, and is in a leading position in the domestic industry.
This level gauge is suitable for measuring and controlling the liquid level and boundary position of high-temperature and high-pressure liquid containers. Clear indication of the liquid level height, intuitive and eye-catching display, isolation between the indicator and the storage tank, safe use, reasonable design, simple structure, easy and reliable installation, stable performance, long service life, low maintenance costs, and easy installation and maintenance.
Users can use remote transmitters according to engineering needs, which can achieve local digital display and output standard remote transmission electrical signals of 4-20mA to meet the needs of recording instruments or industrial process control. It can also be used in conjunction with magnetic control switches or proximity switches to monitor liquid level alarms or control inlet and outlet equipment.
Technical Specifications
Measurement range: 200 ~15000 mm (Level gauges exceeding 6000mm or not allowed to exceed length during transportation can be purchased and manufactured in sections)
Display accuracy: ± 10mm;
Work pressure: 6.3, 10.0, 16.0, 25.0MPa;
Medium temperature: -20 ℃ to 450 ℃;
Medium density: ≥ 0.5g/cm3;
Medium density difference: ≥ 0.15g/cm3 (measurement boundary)
Medium viscosity: ≤ 0.4Pa · S;
Process connection: DN20/25 PN1.0 (complying with standard HG20592~20635-97), other standards can be manufactured according to customer requirements.
Wetting material: 316SS, 316L, etc
(Select according to the chemical properties of the medium and the temperature and pressure of use);
Float material: 316SS, 316L, titanium, etc.
Input type liquid level gauge (static pressure liquid level gauge/liquid level transmitter/liquid level sensor/water level sensor) is a pressure sensor for measuring liquid level. Static pressure input type liquid level transmitter (liquid level gauge) is based on the principle that the measured liquid static pressure is proportional to the height of the liquid. It uses * isolated diffusion silicon sensitive element or ceramic capacitive pressure sensitive sensor to convert static pressure into electrical signal, which is then temperature compensated and linearly corrected to convert it into standard electrical signal (generally 4-20mA/1-5VDC).
Input type liquid level gauge DATA-51 series
Input type liquid level gauge DATA-51 series
Features:
High sensitivity, response time ≤ 1ms.
High precision level, up to 0.1 level.
All stainless steel sealed structure, IP68 waterproof.
Polyurethane gas conducting cable, high temperature resistant and corrosion-resistant.
Compact in size, easy to install and deploy.
Technical Specifications:
Range: 0-5,10,15,20,25,30m or customized
Accuracy level: 0.1% FS; 0.5% FS (optional)
Stability performance: ± 0.05% FS/year; ± 0.1% FS/year
Overload capacity: 150% FS
Zero temperature coefficient: ± 0.01% FS/℃
Full temperature coefficient: ± 0.02% FS/℃
Protection level: IP68
Output signal: RS485, 4-20mA (optional)
Power supply: 9V~36V DC
Environmental temperature: -10 ℃~80 ℃
Storage temperature: -40 ℃~85 ℃
Structural Material: Shell: Stainless Steel 1Cr18Ni9Ti Sealing Ring: Fluororubber
Diaphragm: Stainless Steel 316L Cable: φ 7.2mm Polyurethane Cable

Dongguan Guanglian (Shanghai) Sensor Instrument Co., Ltd. has a good market reputation, a professional sales and technical service team, and with years of business experience, familiar with and understanding the market situation, has won the support of domestic and foreign manufacturers. Our company has become a fixed supplier and domestic trade partner for many large, medium, and small enterprises, and has become a company in the industry.

The company specializes in selling hydraulic components, pneumatic components, motors, pumps, valves, bearings, amplifiers, sensors, relays, filters, accumulators, coolers, pipe joints, and other hydraulic brands from Europe and America, including PARKER from Parker, BOSCH-REXROTH from Bosch Rexroth, VICKERS from Wiggs, HAWE from Hawei Germany, DENISON from Denison, ATOS from Atos Italy, BARKSDALE from Bus Germany, DANFOSS from Danfoss Denmark, HYDAC from Hedec Germany, MAHLE from Germany, and others. The products are widely used in metallurgy, electric power, automobile, coal, petrochemical, shipbuilding, port machinery, engineering machinery, environmental protection, textile, plastic machinery and other fields.