Bao Meng MDRM series magnetic angle sensor information

The magnetic angle sensor measures the angle of the permanent magnet relative to the sensor and converts the angle information into an analog electrical signal output, greatly reducing wear, extending service life, and improving reliability. The non-contact induction principle achieves precise control in complex processes with a resolution of up to 0.09 ° and a short response time. It can operate reliably even in very harsh environments and is suitable for dusty, humid, or polluted environments.

Bao Meng MDRM series magnetic angle sensor information

Overview of parameters for magnetic angle sensor MDRM18U9524:

1. Angle range: 160 ° linear;

2. Resolution: 0.09 degrees;

3. System accuracy: ± 0.25%;

4. Temperature drift: ± 0.2% FS;

5. Response time:<4ms;

6. Power supply voltage range: 12~28VDC;

7. Output signal: 1~9VDC;

8. Load resistance:>1000Ohm;

9. Output circuit: voltage output;

10. Short circuit protection: Yes;

11. Reverse polarity protection: Yes;

Mechanical parameters:

1. Connection method: PUR cable 2 meters;

2. Type: cylindrical, threaded version;

3. Shell material: brass plated with nickel;

4. Size: 18mm;

5. Material of sensing surface; PBTP。

Bao Meng MDRM series magnetic angle sensor information

BaumerMDRM 18U9524 angle sensor

BaumerMDRM18U9524 magnetic angle sensor

BaumerMDRM18U9524magnetismSensors

BaumerMDRM18I9524 magnetic angle sensor

BaumerPhotoelectric switch FPDK14N5101/S14

Baumer photoelectric sensor FPDK14N5101/S35A

Baomeng sensor FPDK14P5101/S14

BaumerOptical switch OPDM12P5101/S35A

Baumer photoelectric switch FEDK10N5101/S35A

BaumerBaumer photoelectric switch OPDM12N5101/S35A\\

Bao Meng MDRM18U9501 angle sensor

Bao Meng MDRM18U9501 magnetic angle sensor

Bao Meng MDRM18U9501 magnetic sensor

Aumer photoelectric switch FPDK20N5101/S35A

Bao Meng/Baumer photoelectric switch FPDK14N5111/S14

Baumer photoelectric sensor FEDK14N5101

Baomeng photoelectric switch FPDK14P5111/S14

BaumerMirror reflection photoelectric switch FHDK14N5101/S14

BaumerPhotoelectric switch FPDK14N5111/S35A

A non-contact product that can replace mechanical potentiometers, with no wear even when in motion for a long time, short response time, high resolution, ensuring high control performance. With absolute angle detection method, even if the power supply fails,Still able to ensure reliable position sensing.

Adopting non-contact detection, even if the vibration is strong or the force of the crane is large, it will not affect the sensor.

The amplifier is integrated into the sensor housing, so the sensor can be easily installed in the narrowest space.