BZD180-101 maintenance free LED explosion-proof light circular for chemical plant

1BZD180-101 maintenance free LED explosion-proof light circular for chemical plantexplosion-proof lampScope of application:

◆ Suitable for Zone 1 and Zone 2 explosive gas environments;

◆ Suitable for Zone 21 and Zone 22 environments with combustible dust;

◆ Suitable for explosive gas environments of IIA, IIB, and IIC levels;

◆ Suitable for environments with temperature levels of T1-T6;

Widely used in explosive hazardous areas such as petroleum extraction and refining, storage, chemical, pharmaceutical, textile, printing and dyeing, military, and electricity;

II

BZD180-101 maintenance free LED explosion-proof light circular for chemical plantexplosion-proof lampProduct Features:

The explosion-proof type of the lamp is IIC explosion-proof structure and IP66 protection level, suitable for lighting in gas or dust explosion hazardous areas;

The lamp housing is made of aluminum alloy die-casting, with a novel and beautiful appearance;

The transparent cover is made of tempered glass, which has high temperature resistance and heat shock resistance properties;

After shot blasting and surface chemical treatment, the surface of the lamp housing is coated with high-voltage electrostatic spraying, which has strong corrosion resistance and a corrosion resistance level of up to WF2;

◆ A good sealing structure is set between each joint surface of the lamp, and the sealing ring is made of silicone rubber material, which is resistant to high temperature, aging, and the housing protection level can reach IP66;

Emergency functions can be added according to customer needs;

Adopting various installation methods such as pipe hanging, ceiling mounted, wall mounted, flange mounted, and guardrail mounted.

3、 Usage and maintenance

Before installing LED lights, check whether the basic technical data listed on the nameplate meets the actual usage conditions.

◆ There is a cable entry line with a diameter of approximately 10mm to 14mm, which is connected to the terminal block through a rubber sealing ring. The cable is tightened with a compression nut to seal it and prevent it from being pulled out.

Before use, check if the wiring is correct and if all fastening screws (bolts) on the casing are tightened. The cable grounding wire should be reliably grounded.

During maintenance, it is strictly prohibited to open the cover while it is live, and the rubber sealing gasket must not be bumped or damaged.

During maintenance, if aging is found in the sealing ring, sealing gasket, etc. of the introduced device, they should be replaced in a timely manner to ensure protective performance.