Automobile Wheel Load Gauge

Automobile Wheel Load Gauge

Structural features:

Simple and lightweight structure, easy to carry

ABS Shaking Handheld Operating Case

Wireless connection for signal reception to avoid vehicle crushing of signal lines

Thin weighing plates minimize the inherent errors of the weighing system as much as possible

By using sensors, accurate weighing values can be obtained

Built in high-capacity rechargeable battery (6V/10A). Charging once, it can be used for a long time and has real-time battery voltage function

Automatic backlight display turned off for energy saving and consumption reduction

Built in real-time clock for displaying and printing dates and times

Built in micro thermal printer for fast printing

Built in full dot matrix LCD display screen (240 × 64), Chinese display, combined with 30 touch film buttons, user-friendly interface, easy and convenient operation.

Technical Indicators:

⑴ Full scale temperature coefficient 5ppm/℃

⑵ Single axis weighing capacity: 30-50T

⑶ Large scale capacity: 25t, 40t, 60t

⑷ Sampling rate 50-400 times/second

⑸ Display new speed of 12.5 times per second

⑹ Sensor excitation power supply DC 5V ± 2%

⑺ Allowable working temperature -20 ℃ -60 ℃

Dynamic and static accuracy: 0.3% -10%

Automobile Wheel Load Gauge

Instructions for Use:

Connect the wires according to the attached wiring diagram and place the testing table steadily;

Suggested ground requirements: During measurement, the testing platform should be placed on a flat cement road surface or a flat and stable asphalt road surface, with an roughness of ≤ 3 millimeters per square meter and an allowable large particle size of ≤ S ￠ 2 on the stress surface;

Open the instrument panel, set the instrument parameters according to the vehicle model, and follow the attached instrument manual for specific operations;

After setting the various parameters of the instrument panel, drive the wheels onto the testing platform. During dynamic measurement, it is recommended that the vehicle's driving speed be ≤ 5Km/h, but not more than 10Km/h. The effective measurement area of the wheels on the testing platform is 700mmX3500mm. When weighing, the tire's point of force must be in this area, otherwise the weighing result will be poor It is strictly prohibited to apply emergency brakes on the testing platform;

After the data is stable, readings can be taken. If you want to print, follow the instrument manual to set it up. After the vehicle passes, press the * Print * button, which will also print automatically;

When not in use, please store the testing table in a dry environment. If the instrument battery is low, please charge it in a timely manner;

Handle with care when transporting, and do not drop or touch.