Automatic open flash point tester

The automation level of BSY-101C fully automatic open flash point tester:

1. Industrial grade ARM32-bit chip core processor, automatically completes the testing process. The data can be exported through a USB flash drive and processed by a computer for environmentally friendly office and paperless testing.

2. Adopting industrial grade PLC programmable logic controller and undergoing three proof paint treatment, the instrument is worry free. 7-inch true color touch screen, can complete the experiment according to the screen prompts without training.

3. Windows CE embedded operating system, with a fully Chinese interface, allows for easy switching of pages, simple and convenient operation, automatic printing of results, and ultra large storage capacity.

4. Automatic diagnosis, over temperature alarm, automatic cut-off of heater power supply, and alarm prompt function upon completion of the test.

5. Data input/output: RS485 connection standard, can be connected to USB 2.0 interface. Support online monitoring and downloading, making it more convenient to use.

6. Copper casting heater, lifetime warranty.

Technical features of BSY-101C fully automatic open flash point tester:

1. This instrument adopts a color LCD large screen display, a fully Chinese human-machine dialogue interface, a capacitive touch screen, and has prompt menu and guided input functions for parameters such as temperature, sample label, atmospheric pressure, and test date that can be preset.

2. Simulate and track the function curve of temperature rise and test time, with Chinese misoperation software prompt modification function, equipped with parameter prompt functions such as test date and test time.

3. Automatically calibrate the influence of atmospheric pressure on the experiment and calculate the correction value.

4. Scanning, detection, and printing data are automatically completed, and the test arm is automatically raised and lowered.

5. Equipped with instrument self-test function, electronic ignition, and forced air cooling.

6. Can manually sweep the flame and check the flash point of the sample at any time.

7. Being able to adjust the hysteresis temperature at any time and expand the measurement range of the instrument.

8. Can automatically determine whether the experimental results meet the requirements of GB/T3536-2008.

Technical specifications of BSY-101C fully automatic open flash point tester:

1. Power supply voltage: AC220V ± 10% 50Hz

2. Heating power: 400W

3. Temperature range: Room temperature to 400 ℃

4. Heating rate: in accordance with GB/T3536-2008 standard

5. Resolution: 0.1 ℃

6. Repeatability: Flash point value: 2 ℃ for ≤ 150 ℃, 4 ℃ for>150 ℃;

7. Reproducibility: 6 ℃

8. Lifting method: automatic tilt

9. Detection method: With full Chinese operation software prompt function, automatically correct atmospheric pressure and calculate correction value; Differential detection, automatic correction of system deviation, equipped with parameter prompts such as experimental date and time

10. Data output: Scanning, ignition, detection, printing of test data automatically completed by microcomputer

11. Ignition method: electronic ignition, intelligent induction ignition.

12. Environmental temperature: 5-35 ℃

13. Relative humidity: ≤ 80%

14. Whole machine power consumption: ≤ 500W

15. Dimensions: 400 * 350 * 300

16. Weight: 20kg