Automatic dropper glue homogenizer

NegotiableUpdate on 02/09

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The MSC-200T-D desktop semi-automatic rotary coating machine is used for surface coating processes that require high uniformity and consistency. It automatically coats photoresist solutions on silicon wafers, indium phosphide, silicon carbide, gallium nitride, lithium niobate, gratings, etc ITO、 Thin films are formed on substrates such as mask templates, mainly used for 6- and 8-inch wafers and square samples. Coat the substrate with a specific layer of photoresist, photosensitive coating, or ink, and then perform a subsequent drying process after removal.

Product Details

Automatic dropper glue homogenizerApplication:

Manually place the substrate ->start vacuum adsorption ->adsorb the substrate onto the turntable ->automatic dispensing ->start rotation ->low speed ->medium speed ->high speed ->stop rotation ->remove the edge ->break the vacuum ->manually pick up the parts.

Automatic dropper glue homogenizerProduct Features:

The syringe type dispensing method is more suitable for scientific research and small-scale production, without the need to clean pipelines;

The whole machine is made of solid materials, imported 750W servo motor, suitable for larger and heavier samples;

The flatness of the suction cup is finely processed and ground, with good uniformity, up to 1% or less;

Electrical independent integration on the side of the body to avoid the risk of short circuit caused by leakage of liquid from the cavity into the interior of the equipment;

Configure a glue filter for easy cleaning and maintenance, avoiding the risk of flying debris caused by glue blockage;

Vacuum negative pressure value display and low vacuum alarm to avoid the risk of flying due to insufficient negative pressure.

Safety measures:

function	Specifications
Vacuum detection	There is a digital display meter and low voltage alarm on the panel
Lid detection	Open lid alarm during operation
Anti inhalation photoresist device	Before installation on the vacuum pump, regular cleaning and maintenance are required to prevent the inhalation of photoresist
control box	Place it on the side to prevent the risk of short circuit caused by liquid leakage

Product Parameters:

Desktop semi-automatic rotary coating machine	power supply voltage	AC220V,50Hz	Operation method	7-inch touch screen
	speed	20~10000rpm	Dropping method	Manual dispensing/automatic
	acceleration	350~10000rpm/s	programming	Programmable 50 sets of 20 steps
	deceleration	350~10000rpm/s	uniformity	1%
	speed resolution	1rpm	Extraction interface	Φ 6mm quick twist interface
	Single step time	3000s	Overall dimensions	650mm×500mm×550mm
	Substrate size	Diameter ≤ 8 inches (200mm)	Total weight	55kg
	Material of the cavity	PTFE	Photoresist container	Rubber pump, pressure tank, American syringe
	Drip glue pipeline	≤ 3 routes (back wash, edge removal optional)	Core accessory brand	SMC、CKD、 Panasonic, Siemens, Koganei, etc
exhaust system	vacuum pump	Dry mechanical pump
	pumping speed	50L/min
	power supply	AC220V 50/60Hz

We can provide various dispensing methods such as 12 inch wafers (uniformity<2%), square wafers, glue pump dispensing, pressure tank dispensing, etc. to meet different production requirements. For more needs, please consult.