Asphalt pressure heating aging test chamber

1、 Product Introduction:

Asphalt pressure heating aging test chamberThe Pressure Aging Vessel (PAV) can simulate the oxidative aging of asphalt during road use and is suitable for evaluating the antioxidant aging ability of different asphalt under test temperature and pressure conditions.

2、 According to the standard:

The requirements specified in T0630-2025 "Asphalt Pressure Heating Aging Test (PAV Method)" in JTG 3410-2025 "Test Code for Asphalt and Asphalt Mixtures in Highway Engineering", SH/T 0774-2005 "Asphalt Accelerated Aging Test Method (PAV Method)" in the petrochemical industry standard of the People's Republic of China, and reference to test methods such as ASTM D6521 and AASHTO-R-28

IIIAsphalt pressure heating aging test chamberTechnical parameters:

（1） PAV-1-1 Asphalt Pressure Aging Chamber

1. Power supply

Power supply voltage: AC220V ± 10% 50Hz

Rated power: 1100W

Rated current of fuse: 10A

2. Pressure vessel

Working volume: 10L

Working medium: Air

Rated working temperature: 110 ℃± 0.5 ℃

Rated working pressure: 2.1MPa

Design pressure: 2.2 Mpa

Hydraulic test pressure: 2.75 MPa

Safety valve opening pressure: 2.15 Mpa

Safe bursting disc bursting pressure: 2.6 MPa

3. Pressure controller

Accuracy: ± 0.01MPa

4. Temperature and time controller

Accuracy: ± 0.1 ℃

Time slot: 64x1080min

Power off hold function: Yes

5. Dimensions: 840 × 520 × 560mm (length × width × height)

6. Control mode: Fully automatic touch screen control

（2） PAV-1-2 Asphalt Aging Vacuum Box

1. Power supply

Power supply voltage: AC220V ± 10% 50Hz

Rated power: 900W

Rated current of fuse: 10A

2. Vacuum container

Working volume: 6.5L

Working medium: Air

Rated working temperature: 170 ± 0.5 ℃

Rated working pressure: pressure 15kPa

Pressure control method: touch screen control

3. Temperature and time controller

Temperature control accuracy: ± 0.1 ℃

Time control method: touch screen

4. External dimensions:440×520×540Mm (length x width x height)

4、 Installation and Debugging:

1. Open box inspection

Before installing the instrument, please carefully count the instrument and accessories according to the purchase agreement and packing list.

2. Installation environment requirements

The instrument should be installed in a ventilated, bright, and dry indoor environment. The height of the table on which the instrument is placed should be 70cm-90cm, and the table should be made of flame-retardant materials.

The instrument should be placed steadily, with all four feet evenly stressed and the end face kept horizontal.

3. Connect power supply

The power supply voltage is AC 220V, and the voltage is stable within ± 10%. The form and size of the power socket should match the plug configured for the instrument.

Insert the power plug into the power socket, the power indicator light will turn on, press the switch, and the control instrument will start working.

If the power is turned on and the indicator lights on and off the instrument panel do not light up, the first thing to check is whether the plug and socket are loose and whether the power is cut off.