Air purification equipment clean transfer vehicle

A clean transfer vehicle is a portable purification equipment that carries a built-in power supply, provides a locally high cleanliness working environment, and has strong universality. Clean transfer vehicles can be widely used in industries such as electronics, instruments, meters, pharmaceuticals, and biotechnology to improve process conditions, turnover products, enhance product quality, and improve yield.

Clean transfer vehicleIt is a unidirectional flow type local air purification device. Equipped with a dedicated rechargeable power supply, it is not limited by the location of the power supply and can be easily moved and used for product turnover.
Vertical flow:Under the action of the air supply fan, the fresh air is initially filtered through the primary filter, and then undergoes secondary filtration through the high-efficiency filter before entering the working area, creating a clean airflow in the working area. Clean airflow flows through the work area at a certain cross-sectional wind speed, thus forming a clean working environment.
Horizontal flow:The airflow flowing through the working area under the action of the supply fan is initially filtered by the primary filter, then sucked by the fan to the high-efficiency filter for secondary filtration, and then enters the working area to form a clean airflow. Clean airflow flows through the work area at a certain cross-sectional wind speed, thus forming a clean working environment.
Lifting and lowering:The equipment has a lifting function, which can raise the entire working area and laminar flow section.

After turning on the power switch and the LED light on the control panel, the device enters the power on state. The LED indicator light on the top left of the controller lights up, and the device can be operated at this time.

Set wind speed: When the fan is not started, press and hold the set button for 3-5 seconds, and the digital display will show the wind speed. Then press the up and down buttons to adjust the wind speed. After adjusting, just don't press any buttons.

Set voltage: When the fan is started and the digital display shows the gear, hold down the set button until the current gear voltage is displayed on the digital display, then press the up and down buttons (while holding down the set button) to adjust the voltage. After adjusting, press no buttons to return to the previous gear (usually starting from gear 3)

Dimensions: 1050 * 560 * 1800mm