- Phone
-
Address
Building 4, No. 686 Nanfeng Road, Fengcheng Town, Fengxian District, Shanghai
Product Categories
Shanghai Gonghuang Sensor Co., Ltd
Acceleration sensor CP808 type
NegotiableUpdate on 05/12
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The acceleration sensor CP808 is composed of a triangular shear accelerometer, a charge converter, and an integral amplifier. Compared with the dynamic coil sensor, it has the advantages of small size, light weight, high reliability, wide frequency band, and can be installed in any direction. Especially, the displacement of the measurable vibration is much larger than that of the dynamic coil sensor, reaching about 10mm (depending on the sensitivity, the lower the sensitivity, the larger the displacement). It has a large output signal, good anti-interference performance, does not require an external power supply, and can be used in harsh environments such as smoke, oil and gas, and water and gas.
Product Details
Acceleration sensor CP808 type
The internal integrated circuit (IEPE type) vibration velocity sensor produced by Zhengzhou Hangke can be used to measure the vibration of bearing shells or structures. The vibration measured by this sensor is relative to the vibration in free space, and its output voltage is proportional to the vibration velocity, so it is also known as a velocity based vibration sensor. The velocity can also be integrated and converted into displacement before further processing. This measurement can evaluate the comprehensive working conditions of rotating or reciprocating machinery, and it is directly installed outside the machine, making it extremely convenient to use and maintain.
Technical Specifications:
Sensitive PC/ms-2：～400
Frequency band range Hz: 0.05-500
Resonant frequency KHz: 2
Range in milliseconds-2±10%：0.0005～500
Z-Large Lateral Sensitivity Ratio%: ≤ 5
Internal structure: cutting
Weight g: 150
Purpose: Ultra low frequency
Acceleration sensor CP808 type
★ Monitor the rotational speed/key phase of rotating machinery.
Measurement parameters
Real time speed value or key phasor signal. Unit type
Rotating machinery with various sliding bearings. Such as steam turbines, fans, compressors, motors, pumps, etc.
★ Suitable for retrofitting old units. Function
★ It has active output terminals of 4-20mA or 1-5V (the "+" and "-" of "4-20mA").
The on-site luminous tube displays the machine's operating status (instrument working status OK, alarm Alert, interlock Danger). The output terminal SPDT of the isolated two-level alarm relay.
★ On site alarm reset button, remote alarm reset/alarm bypass terminal.
★ Can display on-site (requires TM0200) and display vibration values through PLC and DCS.
★ Suitable for various explosion-proof occasions (requiring explosion-proof isolation barrier TM0412).
★ Buffer output of the original signal, directly connected to the status monitoring instrument.
★ 24VDC, 220VAC, or 110VAC power supply, with the 220VAC or 110VAC option being an isolated power supply.
