A Brief Analysis of Automatic Testing of Combustible Materials and Determination of Coal Ignition Point

Standard Requirements for Beijing Zhuorui ZRRD-10A Coal Ignition Point Tester

The ignition point tester is mainly used to measure the ignition temperature of test samples. By measuring the ignition temperature of the sample, preventive measures can be taken to avoid environmental pollution and economic losses caused by material self ignition. It plays an important role in production, research, and use departments.

Forest combustibles ignition point tester ZRRD-10A According to the requirements of GB/T18511, microcomputer technology and thyristor technology are used to adjust the furnace temperature through power regulation. The dual control mode is that the operation can be controlled on the touch screen or on the computer. The control system automatically controls the entire measurement process, automatically heats up, automatically determines the ignition temperature, and saves records and prints the measurement results. The computer communicates bidirectionally with the controller to display the temperature of the heating furnace, automatically draw the temperature variation curve over time, and automatically capture the test results. Can print out test records and reports. Store test data during the testing process for querying.

1、 Scope of application: Mainly suitable for determining the ignition point of materials in industries such as forests, electricity, metallurgy, petrochemicals, coal geological exploration, grain, and feed.

IIZRRD-10A fully automatic ignition point tester for forest combustiblesFeatures:

1. Microcomputer touch screen dual control mode for bidirectional communication, monitoring, automatic control, and display of heating furnace temperature, automatic measurement and display of sample temperature, and automatic drawing of furnace temperature variation curve over time;

2. Automatically record test results, accurate and reliable;

3. Store previous test data for querying and printing;

4. Customized mold forming refractory furnace with good insulation performance;

5. Meet the requirements of GB/T18511-2001;

3、 Main performance indicators

1. Temperature control range: 0 ℃ to 800 ℃.

2. Temperature resolution: 0.1 ℃.

3. Heating rate: 4.5-5.0 ℃/min (rate adjustable).

4. Power consumption: ≤ 1.2kw.

5. Single measurement quantity: 6

6. Temperature measuring element: thermocouple.

7. Time range: 0-999min, resolution: 0.1min.

4、 Usage conditions

1. Environmental temperature: 0 ℃ to 40 ℃.

2. Relative humidity: ≤ 85%.

3. Try to stay away from strong electric and magnetic field equipment as much as possible.

4. Power supply AC220V ± 10%, 50Hz.

5. Dimensions: Length, Width, and Height: 600mm × 400mm × 400mm

6. Whole machine weight: 20kg

5、 Applicable standards:

GB/T 18511

LY/T2013-2012

Supply by Xunyu Technology Co., LtdUpgraded ZRRD-10A Fully Automatic Ignition Point Tester

ZRRD-10A fully automatic ignition point tester with microcomputer touch screen dual control

Standard requirements for ZRRD-10A coal ignition point tester

A Brief Analysis of Automatic Testing of Combustible Materials and Determination of Coal Ignition Point A Brief Analysis of Automatic Testing of Combustible Materials and Determination of Coal Ignition Point