- Phone
-
Address
Baoding National High tech Industrial Development Zone
Product Categories
Baoding Lange Constant Flow Pump Co., Ltd
80 series brushless servo speed control integrated machine
NegotiableUpdate on 07/07
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The 80 series brushless servo speed control integrated machine adopts a brushless servo motor, which integrates the drive and motor into one, and the maximum flow rate can reach 11L/min.
Product Details
80 series brushless servo speed control integrated machineProduct Features
Adopting brushless servo motor, the drive and motor are integrated, and the maximum flow rate can reach 11L/min
Support position control mode, control the absolute rotation angle of the motor through pulse signals
Support speed control mode, control the pump speed through 4-20mA/0-5V analog signal, pulse frequency signal, or communication command (RS485 interface, Modbus RTU protocol)
Equipped with a 17 bit absolute value encoder for closed-loop feedback, it accurately controls the operation of the motor and outputs real-time speed and fault alarms to assist in the closed-loop automation control process
80 series brushless servo speed control integrated machineTechnical parameters
| parameter | 80 series |
| Motor type | Brushless servo motor |
| Does it include a control board | contain |
| Maximum reference flow rate (single channel) | 11000mL/min |
| Including pump head model | nothing |
| speed range | 0-600rpm |
| speed control | RS485, 4-20mA, 0-5V, 0-5V, 0-10kHz (depending on product model) |
| control function | Position control mode, speed control mode (depending on product model) |
| Overall dimensions | 198mm*130mm*138mm |
| Installation Method | Bottom plate installation |
| Applicable power supply | DC24V/260W |
| Working environment temperature | 0℃-40℃ |
| Working environment humidity | Humidity<80% |
Detailed specifications
| Product Model | T600-BLC04S-11 | T600-BLA04S-11 | T600-BLV04S-11 | T600-BLF04S-11 |
| speed range | 0-600rpm | |||
| Speed control accuracy | ±1rpm | |||
| Speed control resolution | 1rpm | |||
| Drive Type | Brushless servo drive, 17 bit absolute value encoder | |||
| control mode | Position control mode, speed control mode | Speed control mode | Speed control mode | Position control mode, speed control mode |
| Position control mode | Communication command controls the start stop, direction, and speed of the pump | nothing |
nothing |
Position pulse signal+direction signal, the pump rotates the corresponding angle in the specified direction |
| Speed control mode | Communication command controls the start stop, direction, and speed of the pump |
4-20mA corresponds to 0-600rpm Dry contact signal control for start stop and direction |
0-5V corresponds to 0-600rpm Dry contact signal control for start stop and direction |
0-10kHz (level 5-24V) corresponds to 0-600rpm Dry contact signal control for start stop and direction |
| Status output |
Speed output: 10Hz-6kHz corresponds to 1rpm-600rpm Fault alarm output: Level signal (default low level alarm, can be set as high level alarm) |
|||
| Communication function |
RS485 interface, Modbus RTU protocol Baud rate: 9600bps, 19200bps, 38400bps, 57600bps Checkpoint: None Mailing address: 1-127 Stop position: 1 position |
nothing | nothing | nothing |
| Power requirements | DC24V/260W | |||
| Dimensions (L * W * H) | 198mm*130mm*138mm | |||
| working environment | 0 ℃ -40 ℃, humidity<80%, no condensation, altitude<2000m | |||
Adapt pump head hose and flow rate
| Adapt pump head | Adapt hose | Maximum reference flow rate (mL/min) |
| (1,2) X KZ25-13 | 15#, 24#, 35#, 36# | 6000 (single channel) |
| KZ35-13 | 73#, 82# | 11000 |
| YZ35-13 | 73#, 82# | 11000 |
Overall Dimension Drawing
Flow Curve Chart
