6V, 12V-100A battery high current dischargeelectrical instrument

WM-F100A/6V,12V

The name on the equipment panel is' Battery Performance Tester '

This machine is a sample room sample, brand new, currently on sale at a discounted price

Used for 6V, 12V, 50AH to 100AHBattery capacity testing

Used for 6V, 12V, 4AH,10AH, 20AH,30AHBattery made

High current constant current discharge test

Performance①

Rated voltage of the tested battery:6V,12V②Constant current discharge current

:0Up to 100A,

③Discharge termination voltage:9999912V

Up to 3V④60Discharge termination time

:oneSeconds tosecond⑤Data collection interval:onetoSet arbitrarily in secondsConnect the computer to set the discharge current,end voltage

,End Time,When one of the termination conditions is met during discharge, the discharge is stopped. Complete the entire experimental process. Computers can draw and display,record,storage,Printing: The curve and data table of the battery voltage corresponding to the time change during the entire experiment process, as well as the stored data from previous experimentsCan be used independently without connecting to the computer host

,

There is a keyboard on the host panel to set the discharge current

,end voltage,,End Time,Start or stop discharge,And automatically complete the entire experimental process.Equipment panel operation instructionsNot connected to computer1Correctly connect a single section6Vperhaps

12VBattery. device(+)Connect the red terminal to the positive pole of the battery with a red cable,device(-)Connect the black terminal to the negative pole of the battery with a black cable. The battery column must be cleaned,Ensure reliable connection.

2Three data points on the LCD screen on the panel

Display separately

:

Voltage（V）Current（1A10）, Time（

s）.3

After connecting the power supply,A. Press the "Switch" button to set discharge parameters, including current, stop voltage, and duration.B. Press the "Switch" button, and the voltage meter will display the last set termination voltage, while the current and time meter will display "-- --",

Select now“

+”Or use the "-" key to change the discharge termination voltage. Press once to increase or decrease the unit

, that is, to change the last digit of the digital display *, long press and hold to increase or decrease the unit each time

, i.e. changing the odd * * digit of the digital tube,C. After the setting is completed, press the "Switch" button again. At this time, the discharge current setting status will be displayed, and the current meter will show the last set discharge current. The voltage and time meter will display "- -". At this time, select“

+”Or use the "-" key to change the discharge current,

D. After the setting is completed, press the "Switch" button again. At this time, the discharge time setting status will be displayed. The time meter will show the last set discharge time, and the voltage and current meter will show "- -". At this time, select“

1+”Or use the "-" key to change the discharge timeE. After completing the settings, press the "Switch" button to exit the settings mode, and the settings will be automatically saved.4After all settings are completed,Press the 'Start' button to start running, and stop running when the stop voltage or time is reached. If the discharge reaches the termination voltage, the buzzer will sound a long alarm.5After the automatic discharge is completed, the battery voltage is automatically locked at the end of the discharge. Press the "stop" button or remove the battery to restore normal voltage sampling.6If you need to stop halfway, press' Stop 'Connecting a computer

Correctly connect the individual sections6Vperhaps

212V

3Battery. device

3(+)

4Connect the red terminal to the positive pole of the battery with a red cable

5,device(-)

6For black terminal posts

Connect the black cable to the negative pole of the battery. The battery column must be cleaned

1.1 ,

Ensure reliable connection.Start computer software;

Create a new data file for storing sampling data;Set current, stop voltage, and time;Select the "Start" button on the computer software; You can also choose to press the start button on the panel to start the test,

If you need to stop halfway, select the "Stop" button on the computer software; Alternatively, you can press the stop button on the panel,Just enough.

When the set termination voltage is reached, the discharge will automatically stop.Computer software installationSystem hardware environment configuration

1.2 CPU: Pentium II Processor

1G