50 ton vacuum vulcanizing machine

HY-50ZHB vacuum flat vulcanizing machine is used for rubber and plastic raw materials, plastics, PP, PA, PE, ABS, pigments, oil and chemical raw materials, etc. Place each raw material in the mold, clamp it between the electric heating plates of this machine, and apply appropriate pressure and temperature to shape the raw materials. The hot plate of this machine adopts a partitioned independent temperature control system for heating, which greatly improves the temperature uniformity compared to traditional single point temperature control systems. The machine also adopts a servo hydraulic system or level control force, with less control force and overshoot, and operates quietly.

1. Controller: PLC microcomputer touch screen system, fully automatic control of force, temperature, time, exhaust, pressure maintenance, etc

2. Capacity: 50T.

3. Power control system: Stepless power control of 3-50 tons, with a control blind zone below 3 tons. Stable pressure control with minimal overshoot.

4. Control range: normal temperature~300 ℃ (higher temperature can also be customized)

5. Temperature control system: zone temperature control, temperature uniformity ± 2 ℃; (Traditional single point temperature control has a large error of ± 10 ℃)

6. Heating method: electric heating.

7. Hot press plate: 300 × 300mm (or other sizes)

8. Number of layers of pressure plate: 1 layer (heating)

9. Heating rate: It takes about 10 minutes from room temperature to 170 ℃

10. Cold pressing plate: none

11. Vacuum function: Standard -60KPa.

12. Oil pressure system: electro-hydraulic servo system

13. Cylinder stroke: Max130mm

14. Cylinder speed: approximately 0-5mm/s (automatic transmission control)

15. Volume occupied space: approximately 1150 × 850 × 1650 mm (W × D × H)

16. Power supply: 3 ∧, AC380V，20A

17. Weight: Approximately 960kg