450 liter constant temperature and humidity chamber HWS-600 temperature and humidity control

Technical specifications

Precautions for using a constant temperature and humidity incubator

Environmental adaptation: It should be placed indoors in a ventilated, dry, and sun free environment, away from heat sources and flammable and explosive materials. A heat dissipation space of more than 30cm should be reserved around to avoid affecting the temperature and humidity stability inside the box due to environmental temperature differences.

Operating standards: Before starting up, check the power supply and water level in the water tank. When setting parameters, follow the principle of "low temperature first, high temperature later, low humidity first, high humidity later" to avoid sudden parameter changes that may damage the compressor. Maintain spacing between sample placement to ensure smooth internal airflow circulation.

Maintenance: Regularly clean the internal shelves and inner walls, wipe the sensor probe with a soft cloth; Replace the distilled water in the water tank every 3 months to prevent bacterial growth; Long term idle requires emptying the water tank, cutting off power, and putting on a dust cover.

Emergency response: If an alarm occurs during operation, first check the fault code and troubleshoot common issues such as power supply and sensors. If it cannot be resolved, promptly contact after-sales service and do not disassemble or repair it yourself.

Main features:

●450 liter constant temperature and humidity chamber HWS-600 temperature and humidity controlAdopting ultrasonic humidification, reliable humidification and uniform humidity.

High precision and large capacity humidity generator. Ensure that humidity control occurs quickly, with high accuracy and minimal fluctuations.

●450 liter constant temperature and humidity chamber HWS-600 temperature and humidity controlAdopting a fully enclosed compressor with delayed start configuration. Multiple protections for high and low pressure.

Unique stainless steel circulation air duct, forcing air circulation and uniform temperature.

The constant temperature and humidity incubator has a super temperature and sensor abnormality protection function to ensure the safety of the instrument and samples.

Common problems and solutions for constant temperature and humidity incubators

Constant temperature and humidity incubators are prone to temperature, humidity, operation, and display issues during experiments. In terms of temperature and humidity, it is common for the temperature to not rise or fluctuate greatly, often due to damage to the heating tube, displacement of the sensor, or aging of the sealing strip; Insufficient or unstable humidity may be due to a lack of water in the humidifier, clogged nozzles, or a malfunction in the dehumidification system. If there is excessive noise during operation, it is likely due to unstable installation of the compressor, worn fan bearings, or uneven placement of the equipment; The odor inside the box is caused by long-term lack of cleaning, sample deterioration, or failure to replace the filter in a timely manner. Display related issues such as no display on the screen require checking the power cord and fuse; The data is inaccurate or garbled, which may be due to sensor malfunction or abnormal signal transmission on the control board.

Regular calibration of sensors, cleaning of humidifiers and enclosures are necessary in daily life. If any problems are found, basic components should be checked first, and complex faults should be promptly addressed by contacting after-sales service to avoid affecting the accuracy of experimental data.