30 ton vacuum flat vulcanizing machine

HY-50ZHB vacuum flat vulcanizing machine is used for rubber and plastic raw materials, plastics, PP, PA, PE, ABS, pigments, oil and chemical raw materials, etc. Place each raw material in the mold, clamp it between the electric heating plates of this machine, and apply appropriate pressure and temperature to shape the raw materials. The hot plate of this machine adopts a partitioned independent temperature control system for heating, which greatly improves the temperature uniformity compared to traditional single point temperature control systems. The machine also adopts a servo hydraulic system or level control force, with less control force and overshoot, and operates quietly.

Characteristics of vacuum flat vulcanizing machine:

1. Controller: PLC microcomputer touch screen system, human-machine dialogue, can set temperature, pressure, time, exhaust frequency, etc

2. Capacity: 30T, stepless voltage regulation.

3. Power control system: servo hydraulic system, stepless power control of 3-30 tons

4. Control range: normal temperature to 400 ℃

5. Temperature control system: Hot plate zone temperature control, with a temperature uniformity of ± 2 ℃;

6. Heating method: electric heating.

7. Hot press plate: 300 × 300mm (or other sizes)

8. Number of layers of pressure plate: 1 layer (heating)

9. Heating rate: It takes about 10 minutes from room temperature to 170 ℃

10. Cold pressing plate: none

11. Vacuum function: Standard -60KPa.

12. Hydraulic system: Electro hydraulic servo system Pre set deflation time and frequency, strong load capacity, smooth lifting and lowering; Automatically apply pressure, maintain pressure, and release pressure The test time has reached automatic pressure relief.

13. Cylinder stroke: Max120mm

14. Cylinder speed: about 0-5mm/s (system automatic transmission control)

15. Volume occupied space: approximately 1100 × 800 × 1650 mm (W × D × H)

16. Power supply: 3 ∧, AC380V，20A

17. Weight: Approximately 930kg