3-inch open mill operation interface

NegotiableUpdate on 05/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

1. Compact and exquisite, with a small amount of glue that can be refined, suitable for testing expensive raw materials, usually used in electronic research institutes, chip accessory research and development, aerospace, and marine climate resistant polymer material research and development. $r $n $r $n2. Adopting PLC touch screen control, the roller opening, speed, temperature, etc. can be digitally and accurately controlled, which is clear at a glance and can stabilize the rubber mixing process; $r $n $r $n3. The opening of the roller is digitally displayed on the screen, and there are two ways to adjust the roller distance: automatic adjustment and manual adjustment.

Product Details

1、 Excellent performance description:

①Automatic temperature control (uniformity can replace oil heating): Each roller is temperature controlled in different areas, so that the temperature distribution of the entire roller is uniform, and there will be no high temperature in the middle and low temperature on both sides.

②Automatic roller distance adjustment: Click on the screen roller to automatically adjust to the set opening, which can preset 4 opening values. Click on it. Quick, accurate, and free from manual labor!

The roller distance can also be manually adjusted by pulling the handle, and the roller distance is displayed in numerical form on the screen.

③Automatic speed regulation: Set the required speed of the roller, and the system will automatically adjust to the set speed without the need for a knob.

2、 Technical parameters:

1. RollerTube:ф76mm×L200mm

2.Speed ratio: 1:1.2/1.4(Front to rear roller ratio, front roller refers to the one that is close to the person during operation)

3.Temperature: Electric heating, room temperature-+200degree

4.Motor:0.3HPThe opening can be adjusted, usually the opening0.1-4mm.

5.Safety system: Brake safety lever, lightly touch with fingers to stop and reverse at a certain angle. The safety lever is located above the roller, and the emergency stop lever is supported by a spring.

6.The overall size is approximately:80*40*50cm.

7.Machine weight:80kgWithin.

8.Mechanical structure: Steel plate (lighter weight, smaller volume, higher mechanical strength, and better toughness than traditional cast iron)

9.power supply 2∮，AC220V，3A

10.Power:3KW