2088 pressure transmitter

I. Overview

WBXY-P20AThe pressure transmitter has high sensitivity, high accuracy, and strong overload resistance. Made with imported sensors, the sensors and amplification circuits are highly integrated; Adopting die cast alloy aluminum surface spray painted shell, the zero point and gain of the circuit do not need to be adjusted; Strong anti-interference ability, acid and alkali resistance, long-term stability and reliability.

2、 Working principle

　　WBXY-P20AThe pressure transmitter uses imported pressure chips, and the sensitive components are formed by diffusion or ion implantation processes to form resistors and connected into a Wheatstone bridge. The pressure sensitive diaphragm is formed under the bridge using micro machining technology. When pressure is applied to the diaphragm, the resistance value changes and a linearized output signal proportional to the applied pressure is generated. We add a DC power supply to the Wheatstone bridge, which produces an output of a DC voltage signal. After secondary conversion of the circuit, a two-wire system is achieved4-20mA output.

3、 Functional Features

◆Good stability, with long-term stability at full load and zero position0.2% FS/year. Within the compensation temperature range of 0-70 ℃, the temperature drift is less than 0.2% FS, and within the entire allowable operating temperature range, it is less than 0.5% FS.

◆Equipped with reverse protection and current limiting protection circuits, the transmitter will not be damaged if the positive and negative poles are reversed during installation. In case of abnormalities, the transmitter will automatically limit the currentWithin 35MA.

◆Solid state structure, no movable parts, high reliability, long service life.

◆From wind pressure to water and oil, high-precision measurements can be made without being affected by the mass of the measured medium.

◆Easy to install, simple structure, economical and durable.

4、 Main technical parameters