120 ton automobile electronic scale customized for mining plant

120 ton automobile electronic scale customized for mining plant​

Introduction to Electronic Truck Scale:

Weighing sensor: high accuracy, moisture-proof, waterproof, can be installed and used outdoors.

Intelligent weighing display: It has functions such as zeroing, skinning, zero point tracking, displaying gross weight, net weight, tare weight, printing date, vehicle number, product name, and weight. It can also be equipped with a microcomputer management system and a large screen display according to user requirements.

Steel or U-shaped beam weighing platform: steel structure, modular, easy to install, beautiful appearance.

The SCS series fully electronic weighbridge is a new generation of weighbridge developed independently by our company, drawing on the strengths of various domestic structures of weighbridges, and gradually optimized through long-term heavy-duty testing. The main and auxiliary beams of the weighing platform are sturdy U-shaped steel structures, and the weighing platform panels are made of high-quality original flat plates, which are reasonably spliced into a closed box shaped frame structure. The use of * fixtures, precise spatial positioning measurement technology, and excellent welding processes during assembly welding effectively ensures the flatness, spatial geometric dimensions, and reasonable distribution of welding stress of such a large scale platform.

Functional Features

Modular, standardized, and serialized weighing platforms, with multiple unit combinations

Automatic reset transmission mechanism

Stainless steel fully sealed bridge sensor with strong waterproof and anti-corrosion capabilities

Digital signal output, capable of long-distance transmission

Strong environmental adaptability: moisture-proof, anti-corrosion, and resistant to radio frequency interference

Fault self diagnosis, weighing data memory

Characteristics of digital scales

Digital transformation technology and compensation technology

The weighing sensor contains an analog-to-digital conversion device and a CPU processing unit inside

Using digital technology to achieve automatic compensation of nonlinearity, temperature performance, and other three parameters of sensors

The advantage of eliminating the need for calibration scales after replacing sensors has been achieved

Operation and maintenance
1、 Instructions for use
1. After the installation of the weighing instrument, it must be verified and qualified by the local metrology department or a nationally authorized metrology department before it can be put into use.
2. Before use, first check whether the scale body is flexible and whether the performance of each supporting component is good.
3. After the instrument is turned on, it can only be used after the zero point is stable.
4. When the vehicle enters the weighing platform (or places heavy objects as gently as possible), the speed should be less than 5km/h, then slowly brake, and measure after the vehicle comes to a complete stop.
5. Try to stay in the center position of the weighing platform as much as possible.
6. The instrument reading must read the correct weight value when the "stability" indicator light is on.
2、 Maintenance and upkeep
l、 To ensure accurate system measurement, prevent wind and rain erosion, and facilitate operation, it is required to set up work sheds and measuring scale rooms.
2. There should be a gap of 10-15mm at the junction of the weighing platform and the slope, and no collision or friction is allowed.
3. The weight of the measured cargo truck should not exceed the rated weighing value of the system.
4. To ensure the normal measurement of weighing instruments, they should be regularly calibrated.
5. There must be no foreign objects stuck under the weighing platform.
6. Scale operators must undergo training before operating, and repair personnel are not allowed to disassemble components without mastering the necessary knowledge, in order to avoid affecting measurement accuracy or damaging the system.
7. The operator of the instrument must thoroughly digest and absorb the instructions of the instrument, master the basic principles, and be familiar with the maintenance methods of the instrument before officially operating and using it.
8. Before powering on the system, it is necessary to check whether the power and grounding devices are reliable. When shutting down after work, the instrument power plug must be unplugged and the power supply must be cut off.

120 ton automobile electronic scale customized for mining plant​