100T gantry hydraulic press

100T gantry hydraulic press

100 ton gantry hydraulic press

Construction Description of 100 ton Longmen Hydraulic Press Machine

100 ton gantry hydraulic press. 1. Main engine part: This machine is a gantry hydraulic press, with the oil cylinder installed on the inner hole of the top and bottom of the machine, and the clamp installed on the lower end of the oil cylinder plunger, which moves up and down together with the plunger.

2. Hydraulic system: The hydraulic system is installed on the right side of the main engine, and the entire hydraulic control system is driven by a motor to input pressure oil into the high-pressure oil pump. The oil is then input into the oil cylinder through relief valves, solenoid valves, pressure gauges, pipelines, etc., causing the cylinder plunger to achieve up and down reciprocating motion. This press is controlled by the inching electrical device.

Characteristics of the use of a 100 ton gantry hydraulic press machine

The 100 ton gantry hydraulic press is widely used in the mechanical industry for disassembly, forming, straightening, stretching, and sheet metal forming pressing work. It can also perform one-time cold riveting of angular teeth and is an essential pressure equipment in the modern automotive repair industry.

This series of hydraulic presses has good rigidity, high precision, and strong resistance to eccentric loads. This type of hydraulic press is suitable for various stamping processes such as press fitting, calibration, stretching, bending, forming, feeding, and flanging, as well as powder metallurgy, automotive parts, household appliances, kitchen utensils, and other pressing and forming processes.

100 ton gantry hydraulic press equipment usage conditions:

1. Equipment working area temperature: -20~60 ℃ (±)

2. Power supply: three-phase four wire system 380V, 50HZ, voltage fluctuation range 380V ± 10%

3. Cooling method: Water cooling device

4. Medium used in hydraulic system: No. 46 anti-wear hydraulic oil
5. Contact number for purchasing 100 ton gantry hydraulic press: 15965114172, contact person: Mr. Liu.