1-micron picosecond fiber laser AP-1030P

NegotiableUpdate on 01/05

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

AdValue Photonics' 1-micron picosecond fiber laser AP-1030P has the characteristics of high energy and high power, and is widely used in laser cutting, drilling, engraving and other applications.

Product Details

1Micron picosecond fiber laserAP-1030P

AdValue Photonics'1-micron picosecond fiber laser AP-1030PIt has the characteristics of high energy and high power, and is widely used in applications such as laser cutting, drilling, and engraving.

Typical applications:

-Laser cutting, drilling, and marking (glass, sapphire, silicon wafer, silicon carbide, ceramics, nickel titanium oxide brackets, etc.)CFRPThePCDandCVDDiamond) 1微米皮秒光纤激光器AP-1030P

-Laser thin film patterning（TCOMetal and thin-film solar cells

-2.5DSurface forming (metal, ceramic, plastic)

-Laser marking (glass, sapphire, silicon carbide, silicon wafer, metal, plastic)

Product Features:

-Picosecond pulse

-High pulse energy and peak power

-High repetition rate

-Near diffraction limit beam quality

-SturdyOEMEncapsulation and compact size

Optical characteristics:

parameter	Specifications
working mode	pulse
Working wavelength	1030 nm
pulse width	15 ps	50 ps
average power	15 W, 30 W, 60 W, 100 W
Pulse repetition frequency	20 kHz to 3 MHz
pulse energy	10 MJ, 20MJ	10MJ, 20MJ, 30MJ
Beam quality,M2	< 1.3
Output power stability	±5%within
Output transmission	Collimated output beam

(If you need customized parameters, please contact us)

Physical characteristics:

parameter	Specifications
Operating Temperature	10 to +30℃
Storage temperature	+5 to +70℃
cooling	Water cooling (portable circulating chiller available for selection)
Power requirements	AC 100~240 V（50/60Hz）(From)AdValue PhotonicsController operation)
warm-up time	10 min
Package Size	356(W)×490(D)×127(H) mm

Mechanical outline drawing: