Isolation type aging room for high-temperature aging system of car charging piles

NegotiableUpdate on 05/07

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Aging room product is a device designed to simulate high temperature and harsh environments for high-performance electronic products. It is an important experimental tool to improve the stability and reliability of electronic products, and an important production process for various manufacturing enterprises to improve product quality and competitiveness. The isolated aging room of the high-temperature aging system for automotive charging piles

Product Details

1、 Characteristics of high-temperature aging room:Isolation type aging room for high-temperature aging system of car charging piles Isolation type aging room for high-temperature aging system of car charging piles

Aging room product is a device designed to simulate high temperature and harsh environments for high-performance electronic products, aiming to improve electronic productsStability and reliability are important experimental tools, and they are important production processes for various manufacturing enterprises to improve product quality and competitiveness. Therefore, aging rooms must also ensure the stability of their own work. They must be of high quality, safe, and reliable. At the same time, to meet the development needs of future production, they should be flexible, open, and have a certain degree of scalability, with the following characteristics:

n The product is practical and stable

n technologically mature

n Safe and reliable to use

n Beautiful and generous appearance

n Environmental protection and energy conservation

n Easy expansion and relocation

n Easy to operate

n Strong management capability

n Localized after-sales service

2、 Execution standards:

n Code for Design of Low Voltage Power DistributionGB50054-95

n Design Specification for Power Supply and DistributionGB50052-2009

n Code for Construction and Acceptance of Grounding Devices in Electrical Equipment Installation EngineeringGB50169-2006

n Classification of Combustion Performance of Building MaterialsGB8624-2006

n Environmental Testing for Electrical and Electronic ProductsGB/T2423.2-2008 Part 2: Test Methods Test B: High Temperature

n Code for Acceptance of Construction Quality of Ventilation and Air Conditioning EngineeringGB50243-2002

3、 Construction and technical parameters of high-temperature aging room:

1、 Main technical parameters:
1	Model:AK-LHF- 209LF
2	External dimensions of the room:D×W×H 2100 mm×1300 mm×2350mm (4 single aging rooms in total);
2.1	Aging ChamberinternalSize:D×W×H1900mm×1200 mm×2300 Mm (single aging room, a total of 4 rooms);
2.2	agingcarsize：D×W×H 1600 mm ×1000 mm1500mm (6 aging vehicles in total);
2.3	Tested product:Smart Cockpit
2.4	Tested product size:Cabin:40020080
3	test scope
3.1	Temperature range:RT+10℃～+85℃ (Adjustable)
3.2	Heating rate:1～3 ℃/min (no-load non-linear), air temperature change rate（The room temperature rises to 60 ° C within 15 minutes
3.3	Heating rate:Reduce from 60 ° to 35 ° within 15 minutes
3.4	Instrument analysis accuracy:0.1℃
3.5	Volatility:≤±0.5℃，(Empty load, constant state)
3.6	temperature≤±1℃
3.7	Temperature uniformity:≤±2℃
4	Aging time：1-999min adjustable, product aging time 1-2h
5	Operation mode：Temperature adjustable, constant operation, time adjustable
6	Install power supply：Three-phase five-wire380v±10% 50±0.5HZ
7	Noise Figure：≤65 decibels
2、 Control system
1	displayRequirements: 1）There should be a LCD color touch programmable controller display on the door, not less than7 inches, display time, temperature, etc., support temperature adjustment, temperature detection, data recording function, sampling frequency can be set, data and curves can be exported； 2）Equipped with a glass observation window, the size depends on the area of the aging room;
2	temperature detection：Indoor temperature detection point5, display mode can be pointer or digital display (pointer display accuracy error controlled within 3 degrees), real-time alarm notification for over temperature anomalies.
3、 Upper computer software
1	supportdockmes，openMES port；
2	The upper computer controls the relay board to power on and off the tested product, controls the acquisition board to test current and voltage, and controlsCAN communication card testing CAN communication data；
3	The current and voltage of the product to be tested,CAN data is displayed in real-time on the upper computer interface, with green for normal status and red for abnormal status；
4	SN、 Test data (including all current and CAN data collected in real-time), results, etc. can be stored and traced for a long time, and can be associated with MES, SN, and data；
5	Capable of overvoltage/Overcurrent protection mechanism, adjustable threshold；
6	The start and end states of product power on can be automatically detected, and the connection status of aging vehicles can be detected; Visual display of device operating status through software interface/Output/yield/CT/data images/test results, etc.
Note: Voltage accuracy 10mv/range 0-60vCurrent accuracy 10mA/range 0-10A
7	Programmable power supply: Low voltage high-power programmable power supply,330(D)x250(W)x155(H)mmProgrammable power supply:60V100A，4platform
8	Wire and cable: The selection of wire should meet the usage requirements, and high-temperature resistant silicone soft wire should be used inside the aging station105℃。
9	Total power of equipment:≤32.5KW