- Phone
-
Address
No. 23 Hangbu Road, Baiyan Science and Technology Park, High tech Zone, Hefei City, Anhui Province
Product Categories
Anhui Aoke Experimental Equipment Co., Ltd
Car components IPX8 high voltage continuous immersion transparent test box
NegotiableUpdate on 05/07
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Mainly used to test whether the electrical, electronic, and energy meter products can ensure good working performance and technical status of the products and components after or during water testing. At the same time, the use of the products may be affected by rainwater, providing application basis for product technical standards. Car components IPX8 high voltage continuous immersion transparent test box
Product Details
1、 Product NameCar components IPX8 high voltage continuous immersion transparent test box Car components IPX8 high voltage continuous immersion transparent test box
IPX8 pressure immersion testing machine
2、 Product Usage
Mainly used for exams*Whether the electrical, electronic, and energy meter products ensure good working performance and technical condition of the products and components after or during water testing, and whether the products may be affected by rainwater during use, providing application basis for product technical standards.
3、 Technical parameters
1. Tank diameter: φ500mm
2. Tank height:500mm
3. Simulated water depth:10 meters
4. Pressure adjustment method: manual adjustment
5. Time control: 1-9999min
6. Pressure control range: 0-100kpa
7. Maximum pressure limit:120kpa
8. Protection: Pressure safety valve protection
9. Function: Meet the testing requirements of IPX8 immersion test
10. Special fixtures for electric energy meters
fourExecution standards
This device strictly follows the*Technical specifications for home environment testing equipment*Manufacturing, effectively simulating the adaptability test of rainwater climate environment to products. Specific implementation standards and national regulations*The standards for environmental testing methods are as follows.
1. GB/T7000.1-2015 IPX8 Waterproof Test Method
2. GB4208-17 IPX8 Waterproof Test Method
3. GB10485-89 IPX8 Waterproof Test Method
4. GB/T4942.1-2001 Classification of Protection for Rotating Electrical Machine Enclosures IPX8 Waterproof Test Method
5. GB/T4942.2-93 Protection level IPX8 waterproof test method for enclosures of low-voltage electrical appliances
6. Waterproof Test of Intelligent Energy Meter
five、Equipment usage environment
1. Environmental temperature: 5 ℃~+35 ℃ (average temperature within 24 hours ≤ 28 ℃)
2. Environmental humidity: ≤ 85% R.H
3. Power supply voltage: AC380V (± 10%) three-phase five wire system;
4. Air source: Compressed air
Similar Product Recommend
