Tensile strength testing machine

NegotiableUpdate on 05/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The servo control computer system tensile testing machine has a wide range of applications. By changing different fixtures, it can test the tensile strength, elongation, tear, adhesive force, tensile stress, peeling, shear force, adhesion force, etc. of various materials such as shoe soles, tires, rubber tubes, triangular tapes, plastic cloth, plastic plates, metals, packaging films, acrylic, FRP, ABS, EVA, PV and other finished products, semi-finished products or dumbbell shaped specimens. The $r $n $r $n machine is driven by an AC servo motor, which is driven by a belt and gears to raise or lower the cross arm. After the sample is stretched or compressed, the data obtained from the force sensor is analyzed by the computer system.

Product Details

Test level	Level 1
Capacity of force sensor	10kN, 20kN (choose)
Power decomposition degree	1/500000
Power amplification factor	Wu Duan
Test force measurement range	0.2%～100%FS
Strength measurement accuracy	±0.5%
Range of force control rate adjustment	0.005～5%FS/s
Relative error of force control rate	Within ± 1.0% of the set value
Maximum travel (excluding fixtures)	1100mm
Displacement decomposition degree	0.00004mm
Deformation measurement range	0.2%～100%FS
Relative error of deformation indication	Within ± 0.5% of the displayed value
Range of deformation rate adjustment	0.02～5%FS/s
Relative error of deformation rate	When the rate is less than 0.05% FS, it is within ± 2% of the set value; When the rate is greater than or equal to 0.05% FS, it is within the set value of ± 0.5%
effective width	410mm
test speed	0.001～1000mm/min
speed and accuracy	±0.5%
Relative error of crossbeam velocity	When the speed is less than 0.01mm/min, within ± 1.0% of the set value; When the speed is greater than or equal to 0.01mm/min, within ± 0.2% of the set value
Constant force, constant deformation, constant displacement control range	0.5%～100%FS
Constant force, constant deformation, and constant displacement control accuracy	When the set value is less than 10% FS, it is within ± 1%; When the set value is greater than or equal to 10% FS, it is within ± 0.1%
Data sampling frequency	200 times/second
contact method	Ethernet cable (RJ45)
display mode	Computer+LEADER Ⅱ software
motor	AC servo motor
Volume (W × D × H)	114 × 70 × 209cm (including base)
Power supply	AC 220V 50/60Hz 800W (by country)