Xerox Fan FB063-6EK.41.V4P

NegotiableUpdate on 05/20

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The Xerox hundred axis flow fan series mainly includes FA, FB, FC, FE, FH, FL, FE-2, FC-2, FT and other series. The forms of Xerox hundred axis flow fans include A-type (without mesh cover), K-type (with mesh cover), and Q-type (with installation base plate). The performance range covers a very comprehensive range and can meet the requirements of various air volume and pressure. The product quality and performance are reliable. Axial flow fans are mainly used in high flow and low-pressure situations. $r $n Xerox Fan FB063-6EK.41.V4P

Product Details

Xerox Fan FB063-6EK.41.V4P

Product model: FB063-6EK.4I.V4P

Working voltage: 1-230 ± 10% V

Noise index: 78db

Motor speed: 860 revolutions per minute

Environmental temperature: -20---------+70 ℃

High air volume: 11000 m3/h

Service life: Please refer to the attached instructions for details

Product size: Impeller diameter 630mm

Working frequency: 50Hz

Power size: 630W

High wind pressure: 0-98Pa

Bearing structure: maintenance free double ball bearing

Product capacitance: 12 μ F

Product Material: Galvanized steel sheet and metal material

Product Description:

Axial flow fans have introduced the design method of helical propellers. Due to the fact that the vast majority of air flows with wind

The axis of the fan is parallel, so this type of fan is called an axial flow fan.

Xerox Fan FB063-6EK.41.V4P

In order to achieve high efficiency of axial flow fans, their blades usually have very complex geometric shapes.

The Xerox hundred axis flow fan series mainly includes FA, FB, FC, FE, FH, FL, FE-2, FC-2, FT, etc

The series of Xerox hundred axis flow fans come in the form of A-type (without mesh cover), K-type (with mesh cover), and Q-type (with mesh cover)

The installation of the base plate covers a wide range of performance intervals and can meet various requirements for air volume and pressure

And the product quality and performance are reliable. Axial flow fans are mainly used for high flow and low pressure situations.

FB series with diameters ranging from 200 to 350 mm: 5 metal blades with diameters ranging from 200 to 350 mm, available in 2 wind directions

Select 50/60Hz UL and CCC certification, with air volume (free blowing) ranging from 700 to 2.800 m3/h

-4 aluminum plate blade metal impellers with diameters ranging from 350 to 650mm, available in two wind directions and 3 different blade installation angles

Degrees, 60Hz and UL certified products, as well as explosion-proof fans, can be selected with a flow rate of 2000 to 13000m3/h when there is no resistance.

Fans with short guide rings are usually used on certain equipment, and by changing the blade installation angle and motor speed

Meet various requirements, with 100% controllable speed.