Motor energy-saving controller delivered for use in high-temperature aging room

Wuhan Pusixin Electronic Technology Co., Ltd. is a high-tech enterprise located in Jiangxia District, specializing in the research and development of various motor energy-saving controllers. Due to the wide range of applications of motor energy-saving controllers, especially in automobiles, strict quality requirements are imposed,high-temperature agingExperiments become very important and necessary projects.

Mr. Liu and Mr. Qiao of the company have raised the aging requirements for their products directly to 85 ℃, which is higher than the aging requirements of other peers at 65-70 ℃. This not only challenges the requirements for their own products, but also puts higher demands on us as aging rooms.

We know that 85 ℃ is important for our professionHigh Temperature Aging ChamberIt is not an excessive requirement for high temperature, but customers have high demands for temperature uniformity (2 ℃) and temperature rise, and the distribution is affected by the park, so it cannot be too high.

Our company believes through calculation that as long as special air ducts and insulation measures are adopted, the requirements can definitely be met.

After the technical issues were resolved through communication, the project schedule became another issue because the customer requested us to deliver within 5 days. However, their customer conducted an on-site assessment of their product support after 5 days of factory inspection. If there is no critical equipment: a high-temperature aging room, it is definitely impossible to pass.

It can be said that it is impossible to order air ducts, electrical control boxes, heating pipes, insulation cotton, and electrical components in such a short time according to conventional thinking, because it takes three to four days to order them, and it takes time for supporting manufacturers to ship and transport them. On site installation and wiring cannot be obtained without four to five days, especially during the epidemic period!

However, since the client has made this request, we can either do it and complete it on schedule, or let someone else do it!

Shangce people have never been discouraged by such a problem before. It's not a matter of profit, it's a matter of responsibility, it's a question of whether we can share the burden and solve the problem for our customers!

Firstly, this is not a major technical difficulty for us at all. The technology is not that difficult anymore. Secondly, as a company specializing in the production of high-temperature aging rooms, materials must be in stock. We have a professional history of producing high-temperature aging rooms for 11 years. 11 years ago, we were the only professional high-temperature aging room design and manufacturing enterprise in Wuhan and even Hubei Province. How could we not have enough inventory? Finally, there is the issue of personnel. Although the company is very busy towards the end of the year, we immediately organized a team of four people to be responsible for the production and installation of the aging room.

As the saying goes, 'Action is the key to success!'! We took action immediately without even signing the contract, despite the customer's promise. Because the customer is very sincere and trusts us. If we still mechanically sign the contract and receive the advance payment as usual before starting, this process will take three or four days internally within their company, which will definitely delay the construction period.

Mutual trust is the foundation of cooperation. Seeing each other's sincerity and urgency, we have decided to handle this special matter accordingly!

After 5 days of hard work, we finally completed the acceptance inspection on schedule!

The customer received the audit team's review on schedule and successfully completed the task. We believe that our high-temperature aging room, as a powerful tool, will definitely bring significant positive promotion to their cooperation!