DFS2 dynamometer marks a new era in mechanical measurement
DFS2 dynamometerMarking a new era in digital mechanical measurement. This compact and easy-to-use force gauge is not only cost-effective for application, but also has comparable functionality. It is suitable for use as a handheld device and can also be used for testing bench applications.
The DFS2 dynamometer is commonly used to collect data on production samples at the end of the production line, for implementing qualified/unqualified inspections, or for online recording of quality testing data on incoming inspection results. It features a clear and easy to read dot matrix LCD full-color display screen, supporting multiple standard dynamometer functions, including conventional and peak readings, maximum high/low limits, set points, qualified/unqualified results, statistical results, load sensor drive and direction.
DFS2 dynamometer is a commonly used force measuring instrument in industrial practice, applied in the measurement of acceleration, pressure, and force. It has been widely used in tension measurement of aircraft, automobiles, ships, bridges, and buildings.DFS2 dynamometerAs a widely used equipment, it is widely used in important industries such as ports, power, steel, shipbuilding, petrochemicals, mining, railways, construction, metallurgy and chemical engineering, automobile manufacturing, plastic machinery, industrial control, highways, large-scale transportation, pipeline auxiliary equipment, slope tunnels, shaft protection, offshore tensile testing, marine engineering, airport construction, bridges, and mechanical equipment for infrastructure construction projects.
The production speed of DFS2 dynamometer is no longer an important indicator, but rather the energy consumption per unit weight of processed products. Therefore, it is necessary to optimize the mechanical structure, control mode, and operating process conditions of injection molding machines based on low energy consumption. Adopting advanced energy-saving technologies has become a goal pursued by many users. The DFS2 dynamometer plays an important role and has a positive impact on promoting the transformation and upgrading of China's plastic machinery industry and building a new industrial structure. As an upstream industry, manufacturers in the automation industry will also launch more energy-efficient products, allowing green injection molding machines to quickly enter the world.
The DFS2 force gauge is made based on the principle that the greater the tension applied to the spring, the longer the spring elongates. It is used to observe the maximum scale value on the spring scale panel, and pay attention not to exceed its range when applying force. The tension is applied to the spring scale along the central axis of the spring, and the pointer is checked to see if it is at the zero position. If not, it should be adjusted to the zero scale line.DFS2 dynamometerBefore use, gently pull the spring a few times to avoid it getting stuck. Observe that the pointer reading line is perpendicular to the scale line. Before measurement, the spring should naturally sag and check if the pointer is aligned with the zero scale line. The measured force should not exceed its measurement range and the reading must be taken in a stationary state.
