Ametek material testing machine has achieved success in the industry*
Ametek Material Testing MachineIt is used to measure the melt flow rate of various high polymers in a viscous flow state. Under certain temperature and load, the mass or volume of the melt passing through a standard die every 10 minutes is represented by MFR or MVR. The melt flow rate meter is suitable for engineering plastics such as polycarbonate, polyarylsulfone, fluoroplastics, nylon, etc. with high melting temperatures, as well as for testing plastics such as polyethylene, polystyrene, polypropylene, ABS resin, and polyoxymethylene resin with low melting temperatures. It is widely used in plastic production, plastic products, petrochemical industry, relevant universities, research units, and inspection departments.
The Ametek material testing machine is suitable for measuring the mechanical properties of materials such as tensile, tearing, and peeling. When using a reverser, it can perform compression tests on materials. It is a new type of economical material testing machine with stepless speed regulation, equipped with force sensors and automatic elongation tracking devices. During the testing process, the microcomputer continuously collects signals from the force sensors and automatic elongation tracking devices, and formats the data processing according to the testing requirements. Its characteristics are simple to use, stable performance, advanced technology, high automation level, and high testing accuracy.
Ametek material testing machine is a precision instrument and equipment used to test the properties of metals, non metals, rubber and other materials. The usage method, problems and maintenance required during the use of the material testing machine have been introduced many times. Today, we will introduce some important issues that are often overlooked by everyone. ifAmetek Material Testing MachineThe limit rod did not respond in a timely manner and was moved up and down by hand; Turn on the power of the testing machine, and in a quiet environment, you can hear the sound of the motor servo system running; Overload protection can only protect sensors and other parts of the equipment to a certain extent. This function does not guarantee that sensors and other parts of the equipment will not be damaged.
The fracture position shown in the Ametek material testing machine software measurement and control system test results refers to the instantaneous force value at which the sample * fractures and separates. The location of the crack in the sample may occur at the maximum force or at the location of the fracture force. It varies depending on the specific material. The Ametek material testing machine is mainly capable of conducting tensile, compressive, bending, tearing, 90 ° peeling, 180 ° peeling, shear, adhesive, pull-out, and elongation tests on rubber, plastic, film, textile, fiber, nanomaterials, polymer materials, polymer materials, polymer materials, polymer materials, composite materials, packaging tapes, paper, wires and cables, fiber optic cables, seat belts, safety belts, leather belts, shoes, tapes, polymers, spring steel, stainless steel (as well as other high hardness steels), castings, steel plates, steel strips, non-ferrous metals, automotive parts, alloy materials, and other non-metallic and metallic materials. useAmetek Material Testing MachineConduct tests on the tensile strength and elongation, peel strength, heat sealing strength, and tear resistance of plastics.
