Gas pretreatment system for leachate workshop in garbage dumpApplication areas: Suitable for sampling, purifying, and environmentally friendly emissions of sulfur dioxide gas from combustion equipment such as boilers, heating furnaces, kilns (cement kilns, glass kilns, ceramic kilns, etc.), roasting furnaces, incinerators, coke ovens, etc. Suitable for use in high or low temperature environments such as agricultural greenhouses, laboratories, cold storage facilities, and high-temperature furnaces.
1. High temperature pretreatment device: Ensure that ammonia and hydrogen sulfide gases can be effectively condensed to remove water
2. Three stage filtration device: oil removal, dust removal, and drying
3. Temperature monitoring device: real-time temperature display
4. Gas sampling device: 5-liter vacuum sampling pump
5. Gas detection device: monitors industrial waste gases such as toxic and harmful sulfur dioxide gas
6. Built in electronic condenser and drainage pump, capable of automatically draining condensation
7. Flow control device: controls the real-time flow of sulfur dioxide gas
8. PLC control system: data analysis, data storage, data export
9. 7-inch LCD touch screen display: switching between Chinese and English, switching between sulfur dioxide gas units
10. Optional: Wireless transmission module 4G Lora wifi DTU, etc. Upload to the Environmental Protection Bureau
11. Waterproof design, fast detection, reliable, and stable.
12. The ammonia and hydrogen sulfide gas analyzer can be built into the chassis or externally installed
13. The standard sampling distance is 20 meters, and an optional farthest sampling distance exceeding 40 meters is available
14. The standard processing temperature is 200 ℃, and it can handle flue gas up to 1300 ℃
Precautions for use:
1. Flow control: During system operation, the gas flow rate through the detection instrument is controlled at around 400ml/min by adjusting the flow meter and the throttle valve on the lower drainage pipe of the condenser.
2. The target condensation temperature of the condenser can be set to the default temperature.
3. Regular manual maintenance and cleaning of the dust filter are required to prevent dust from blocking the air path.